Cosmetics Formulation Development

Hello INGREDIENTS 1.Warp cream XL 14% 2. Dimethicone (Very light/ 5) 12% 3. Dimethicone 1secs 5% 4. Oil-Fix W 1% 5. SiliSolve Plus 1% 6. Silicone Film (Long Wear, soft, Isododecane ) 5% 7. PMMA Booster 3% 8. LipidSoft CC 3% 9. Magnesium Sulfate 1% 10. SiliPerse 0.25 11. SPF Protect Ultra 15% 12 . Zinc Oxide 200nm 10% 13. Mild Preserved 1% 14.Aqua asks for permission to study and ask the team 1) Found that there was a separation problem. when left for a long time There is a floating oil on the cream. I want to know how to fix it by adding SiliSolve Plus is 2% and Oil-Fix W is 2% appropriate or not, or is there any more suitable way to teach the team to recommend as well? 2) Sunscreen formula can use 20nm Silver instead of สารกันเสีย Would you use it instead of Mild Preserved ? Mild Preserved ? 3) compared between SiliSilk 5 micron with LipidSoft Which spread should serve to provide smoothness? spreads easily on the skin more than each other For the creamy texture that is quite stiff when spreading? 4) Zinc Oxide Nano EasyDisperse can be used in formulas. Water in Oil / water in silicone ? thank you

Ask for more permission or use Warp Cream Maker XL instead of SiliSolve Plus Think about it and come up with this formula. What is your opinion and recommendation? 1)Warp Cream XL 20% 2) Dimethicone (VeryLight/5) 15% 3) Dimethicone 1secs 5% 4 ) Magnesium Sulfate 2% 5) Oil-Fix W 2% 6) SiliPerse 0.25% 7) LipidSoft CC 3% 8) Disodium EDTA 0.2% 9)20nm silver 1% 10) SPF Protect Ultra 20% 11)Zinc Nano EasyDisperse 10% 12) PMMA Booster 3% 13) Silicone Film (Hard,Iso) 5% 14)Beige Iron Easymix 0.5% 15)Aqua is the formula suitable? Note that if you want the formula to become more liquid in the formulation water in silicone means there is less water in the formula and the proportion of ซิลิโคน high from The formula has enough water. Will there be a chance to split up or will there be a problem? Please advise the team, thank you.

Hello,

1.Warp cream XL 14% 2. Dimethicone (Very light/5) 12% 3. Dimethicone 1secs 5% 4. Oil-Fix W 1% 5. SiliSolve Plus 1% 6. Silicone Film (Long Wear, soft, Isododecane ) 5% 7. PMMA Booster 3% 8. LipidSoft CC 3% 9. Magnesium Sulfate 1% 10. SiliPerse 0.25 11. SPF Protect Ultra 15% 12 . Zinc Oxide 200nm 10% 13. Mild Preserved 1% 14.Aqua

would you like to know the steps that members have mixed with?

This is a test formula that I ordered to produce. So I don't know the mixing process.

Hello, I do not know the recipe that the owner of the recipe. Not allowed to adjust the formula or not? Formula adjustments are not allowed. Notify directly on the recipe page. that the formula is stratified by the RD who takes care of the formula as follows The manufactured product must be taken out. come back to fix it You can adjust the formula and produce a new one until it's normal without any additional cost.

thank you very much It is a formula that does not specify that it is forbidden to adjust. Will separate layers of sunscreen affect the effectiveness of sun protection? because when using hands to mix together It's like normal meat at first.

Hello, please inform RD via the formula page. So that the RD who takes care of the member's recipe Let's continue.