First, separate the ingredients that can be heat resistant which will be mixed in the first step and ingredients that are not heat resistant which will be separated to mix in the last step The ingredients to avoid overheating (>60 degrees) are Tranexamic Acid , WhiteCumin , 4MSK , Sym-White The initial steps for mixing are as follows: water, water to complete 100 EDTA 0.2% AnyGel™ 2% mixed AnyGel with water, blended or stir until smooth gel, then add EDTA , stir or dissolve. part of oil LipidSoft™ Lite 5% Butter Cream Maker 2% Reservoir-Tech 3% 1,2-Hexanediol 3% Phenoxyethanol 0.3% heat at least 70 degrees, warm to melt together Then bring the prepared portion of water to be heated to 70 degrees, close to the part of the oil. Then slowly add the water to the oil. Blend or stir to combine. will get cream When the cream is obtained, wait for it to cool down to no more than 40 degrees. Add the rest of the ingredients to the recipe. Blend or stir to dissolve together.step Mix water-soluble ingredients with water to 100 EDTA 0.2% Tranexamic Acid 3% WhiteCumin 3% 4MSK 3% add AnyGel™ 2%, stir well, add the oil and warm the formula to dissolve, stir well LipidSoft™ Lite 5% Butter Cream Maker 2% cured and added, stir to combine Sym-White 0.5% Reservoir-Tech 3% 1,2-Hexanediol 3% Citric Acid 0.2% Phenoxyethanol 0.3%
The team thinks that using 1,2-Hexanediol 3% + Phenoxyethanol 0.3% is enough for this formula.Actually in this formula it is necessary to put กันเสีย added? 1,2-Hexanediol 3% and will not wear กันเสีย but see AnyGel says to enter กันเสีย because it is a natural substance.
The team thinks that members can reduce LipidSoft™ Lite 3% is fine, but it shouldn't be lower than this.The recipe requires oil to dissolve. Sym-White means it doesn't need any moisture, should put LipidSoft™ Lite how many % will be enough to dissolve? Do you feel that 5% should be too much?
can you do it?In this formula can be added Niacinamide 5%
. It can be heated but not more than 60 degrees.The ingredients to avoid overheating (>60 degrees) are Tranexamic Acid , WhiteCumin , 4MSK , will it deteriorate the efficiency of the original mixture after being heated in the formula? Because, as in the details, it's not clearly stated that it can't be heat-resistant
First, separate the ingredients that can be heat resistant which will be mixed in the first step and ingredients that are not heat resistant which will be separated to mix in the last step The ingredients to avoid overheating (>60 degrees) are Tranexamic Acid , WhiteCumin , 4MSK , Sym-White The initial step of mixing is as follows: water, water to complete 100 EDTA 0.2% AnyGel™ 2% mixed AnyGel with water, blender or stir until smooth gel, then add EDTA Blend or stir. part of oil LipidSoft™ Lite 5% Butter Cream Maker 2% Reservoir-Tech 3% 1,2-Hexanediol 3% Phenoxyethanol 0.3% heat at least 70 degrees, warm to melt together Then bring the prepared portion of water to be heated to 70 degrees, close to the part of the oil. Then slowly add the water to the oil. Blend or stir to combine. will get cream When the cream is obtained, wait for it to cool down to no more than 40 degrees. Add the rest of the ingredients to the recipe. Blend or stir to dissolve together.Steps Mix water-soluble ingredients with water to 100 EDTA 0.2% Tranexamic Acid 3% WhiteCumin 3% 4MSK 3% add AnyGel™ 2%, stir well, add the oil and warm the formula to dissolve, stir well LipidSoft™ Lite 5% Butter Cream Maker 2% cured and added, stir to combine Sym-White 0.5% Reservoir-Tech 3% 1,2-Hexanediol 3% Citric Acid 0.2% Phenoxyethanol 0.3%
Butter Cream Maker can combine oil up to 30%. Please check the features from the product detail page which will be notifiedfollowed the above formula recommended by the team. How much oil can I get? The latest recommended oil total is 13.3%. Previously, the team said the formula had 8.5% oil
Phenoxyethanol is heat resistant. But it should not be too long, 80 degrees, no problem.already Phenoxyethanol can withstand heat up to 60 degrees? Is it because there is no เทอร์โมมิเตอร์ measure exactly.