Myskinrecipes team. If you want to be effective in treating melasma as well. What ingredients must be added? And how many percentages should I put? Thank you very muchFrom this recipe The team adjusted it as follows. Galactomyces Ferment Filtrate (Pitera) complete 100% Horse Placenta 3% Safe-B3 3% RETINAT™ (Starfish Extract) 1.6% Cell-Energy™ Liquid ( Adenosine Liposome) 2% Pro Polymer 1% add Pro Polymer into Pitera , then blend or stir until smooth gel. Leave no agar lumps floating around and then add the ingredients. Blend or stir to dissolve together. This formula can be used on both the face and eyes, but to reduce bags under the eyes, you may need to use REGU®-AGE or maybe choose Glycosaminoglycans Complex more in the formula. (added in the last step Blend or stir to mix with the gel.)
recommend Tranexamic Acid 3% **Can irritate the skin if it's sensitive, easily irritated. Recommended to try at 1.5% first**Team Myskinrecipes. In this recipe that the team recommends. If you want to be effective in treating melasma as well. What ingredients must be added? And how many percentages do I have to put?
can use Sulfate Free Shampoo Base All can be done by choosing a high-low usage rate. According to the area of skin used, for example, if used to clean the face, may be used at 15% and body at 25-30%.- liquid soap formula with nourishing skin in the body. (Please tell me the mixing process) - Liquid soap or gel formula for facial cleansing with built-in nourishment. (Please tell me the mixing process) (both formulas for sensitive skin)
Thank you very much for the recommendation. I will try to mix it according to the instructionsThis is due to the fact that the formula contains a large amount of active ingredients and has not been used as an active ingredient. emollient or adjust to smooth To reduce the gooey, if accepted. Silicone , the team recommends adding Silicone Gel (Ultra Clear) into the formula at a starting rate of 5% based on the original formula. don't have to leave Let's fill it up. and blended or stirred to match the recipe (The formula will become white cream) If you do not accept the use LipidSoft Dry II rate 5% (mix with the same method above)