Browse Questions and Answers
Avg response: 24 HrsFilter Questions
20 of 14238 results
I have the ingredient list for Clinique Moisture Surge. The texture is a translucent, peachy-colored gel that is thick, stable, soft, smooth, and absorbs instantly. My formula contains 8% oil and I recently tried using Silky Serum Base Plus, but it didn't result in a clear texture. Here are my questions: 1. Which Emulsifier(s) in the Clinique Moisture Surge formula provide a clear texture, and what is the approximate usage percentage? 2. Besides Cyclomethicone, which is recommended for use with Silky Serum Base Plus, can I use Trisiloxane or Dimethicone 1 sec in Silky Serum Base Plus? 3. I've tried using various silicones in my formula, which give a soft, smooth skin feel. However, I still feel a sticky residue and the skin looks shiny after application due to the cream texture. Can I use Silicone Gel in Silky Serum Base Plus to reduce tackiness and achieve a matte look? Or do you recommend other ingredients? Thank you for your advice.
Requesting a hair mask formula containing keratin to restore chemically damaged hair. The desired results are soft, smooth, detangled, and shiny hair from the first use. This is for personal use.
Based on the initial conversation history: I have a gel formula with the following composition: * Water 11.2% * Galactomyces Ferment (Pitera) 65% * Tranexamic Acid 3% * Niacinamide 5% * Moist 72 2% * DMAE 3% * Propylene Glycol 8% * DMI 2% * Xanthan gum 0.5% * phenoxythanol SA 0.5% The Pitera purchased was initially colorless. After mixing the formula and storing it for about 2 days in an opaque pump bottle (brown, square, black pump with gold thread, 50ml) at room temperature (28-30°C), the gel started to turn light yellow. The pH of the formula is checked to be approximately 6. I would like to know: 1. Is the light yellowing of the gel formula due to the degradation of Pitera, or is it caused by incompatible ingredients reacting with Pitera? 2. After mixing the above formula, is it necessary to store it in a cool place (refrigerator)? 3. If the formula has turned yellow, can it still be used? Thank you.
I have 3 questions regarding formulation: 1. I am using `Emulsifier` (`Sensitive Cream Maker`) which requires heating to 70-80°C for melting. However, all the active ingredients I want to use are water-soluble and must be added at a temperature not exceeding 60°C. The formula is `Water-Phase 80% Oil-Phase 20%`. Can I mix the Oil phase + `Emulsifier` + `Distilled Water` (pure water) about 70-75% of the total water phase, heat this mixture to 70-80°C to form the cream base, and then add the remaining `Distilled Water` containing the Active Ingredients (5-10% of total water phase) after the cream base has cooled down below 60°C? I am concerned about the efficacy of the actives if mixed at 70-80°C. 2. Are there any cream `Emulsifier` types available that do not require heat, are `PEG-free`, and are `electrolyte tolerant`? 3. What are the criteria for deciding whether to emulsify as `Oil-in-Water` or `Water-in-Oil`? Is it based on the desired texture/feel, or is it related to which phase (water or oil) is present in a larger amount in the formula?
I have a formulation divided into parts A, B, C, and D. I plan to mix part A, then add part B, followed by C and D. **Part A:** * Water 12 * shea butter 1% * Cetely 2% * เกร็ดสบู่ (เพื่อเพิ่มฟองชะล้าง) 10% **Part B:** * Glycerine 2% * Mineral Oil (Paraffinum Liquidum) ชนิดเบา 3% * Pg 5% * น้ำมันเมล็ดองุ่น 2% * Avocado Oil 1% * Emulliant O5 5% **Part C:** * เกลือแป้ง 45% * ผงสมุนไพร ชาเขียว 3% * ดินสอพองสะตุ 7% * กรดมะนาว 0.5% **Part D:** * กันเสีย Phenox 1% * กลิ่น 0.5% Based on the formula above, are all the ingredients compatible?
I am interested in formulating a serum with the following main active ingredients: * 4D Hyaluronic 5% * Repair Activator 10% * Galactomyces I have the following questions: * Is Mild Preserved Eco™ 1% sufficient as a preservative? * Is using DMI / 1-2 Hexandiol / Lauropram / Phospholipid together too many penetration enhancers? * What should be added to maintain the quality and prevent degradation of the main ingredients?
Could you please provide information about the formulation of solid shampoo bars? What are the typical main ingredients and how are they processed?
I am formulating a facial cleansing gel using Ichthammol. I have a few questions: * If Ichthammol has a strong smell, can I mix it with Odor-Kill in the facial cleansing gel to eliminate the odor? * The information states that Ichthammol should be mixed with oil in the formula to enhance performance. Should I mix Ichthammol directly with any oil (e.g., Rose Hip Oil) until combined before adding it to the base (water, surfactant, etc.)? Or should I mix the water, surfactant, and oil first, and then add Ichthammol and preservatives after everything is well combined? * Will the formula be compatible and stable using this method? * What is a suitable percentage for the oil? * Is the recommended usage for Ichthammol 2-3%? * Is 0.5% Disodium EDTA sufficient?
Which gel powder should I use to make a gel that absorbs well into the skin and doesn't leave much residue?
I am a retired civil servant interested in making a high-quality herbal shampoo. I have the following questions: 1. Regarding the recommended **Sulfate Free Shampoo Base**: * Does this indicate it is a stable and good base formulation? * What are the production steps? * If I prepare herbal water, can I simply add it to the **Sulfate Free Shampoo Base**? * If I use 100g of **Sulfate Free Shampoo Base**, how much shampoo can be produced? Are the production steps detailed in the product description? 2. It is mentioned that preparing herbal water carries a risk of bacterial growth. If I boil and filter the herbal water thoroughly, and sterilize the packaging bottles beforehand, is this sufficient to prevent bacterial growth? 3. Is there a LINE ID or phone number for the expert available for quicker and more convenient contact when issues arise?
Is the Rosewood oil sold on the website under the category "Essential Oil" 100% pure, without any base oils or synthetic additives?
I have two manufactured formulations: 1. **Anti-oxidant & Hydrating Essence**: This formula feels very sticky/tacky on the skin after application, like syrup. The skin feels like it's 'absorbing' everything it touches and remains tacky until washed off. 2. **Skin Rejuvenation Serum**: This formula is not sticky but feels slightly tacky on the skin. I would like advice on purchasing ingredients to adjust the formulas myself, as they have already received FDA approval and cannot be officially modified. * If I purchase WaterSoft (PEG/PPG-17/6 Copolymer) and add it to these formulas, will it help reduce the stickiness/tackiness when applied to the skin? Are there any other ingredients that can help reduce stickiness/tackiness? * If I can add it, what percentage should I use? Can I mix it directly in the bottle by shaking? Will adding this ingredient have any negative impact on the formula?
I am retired and want to make herbal shampoo. I have two problems: * How can I make the shampoo texture thick and prevent sedimentation? * What are the safest chemicals to create foam?
* Can Aloe Vera Gel (Lite) be applied directly to the face without adding anything? * If I want a lighter texture that is less sticky and absorbs faster, what should I add?
# Formulation Ingredients Here is the list of ingredients and their amounts: 1. Witch Hazel Plus Allantoin 120g. 2. Matrixyl 3000 10g. 3. DMAE 5g. 4. 4D Hyaluronic Acid 10g. 5. Wrinkle Lax 1g. 6. Wrinkle Fill 2g. 7. Encapsulated Retinol 2g. # Questions 1. I want to make a water essence. Can these ingredients be easily mixed by simple stirring, without needing a blender? 2. What parts of the formula should be adjusted or improved? Please advise.
Based on the previously provided formula: - Sulfate Free Shampoo Base 25% - Mild Preserved Eco 1% - Water remaining to 100% I want to make a simple facial cleansing gel for home use. I have the following questions: 1. If I change from Sulfate Free Shampoo Base to Sulfate Free No-Tear Shampoo Base (pH 6, Clear, Foaming), will the performance differ significantly? 2. Do I need to add Citric Acid? I understand the base has a pH in the range of 6.5-7.5, and I think I might need to add Citric Acid to adjust the pH to around 5-6.5 for facial skin. If I reference the formula above, what percentage of Citric Acid should I add?
I am using D&C Red 27 in a color-changing lip balm formula that is melted into a stick. After leaving it for 2-3 months, the color fades. What is the cause?
I've tried mixing a Lidocaine HCl formula several times before without success. The problem is that the Lidocaine doesn't penetrate the skin. A friend suggested using a W/O type emulsion and finding an oil that can act as a Penetration Enhancer to help the active ingredient penetrate the skin. I would like to know if this formula can be used and how to mix it: 1. Lidocaine HCl 10% 2. น้ำกลั่น (Distilled Water) 20% 3. น้ำมันสวีทอัลมอน (Sweet Almond Oil) 60% 4. ตัวผสานน้ำในน้ำมัน W/O ?% 5. กันเสีย (Preservative) ?%
How to make a water-based gel sunscreen using water-dispersible Titanium Dioxide waterproof? I want to develop a water-based sunscreen gel. I have tested a formulation using water-dispersible Titanium Dioxide in a water-based gel, which I like. However, it does not have waterproof properties, causing white streaks on the skin when sweating. How can I make this type of formulation waterproof?
