Zinc Oxide (Micronized)
- Product Code: 292
Micronized Zinc Oxide For use in diaper rash cream formulations. deodorant etc.
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
| Test Name | Specification |
|---|---|
| Zinc Oxide content | 93 % min. |
| Ignition Loss (800C, 4hrs) | 6 % max. |
| Sulphate as SO4 | 0.2 % max. |
| Chloride as Cl | 0.1 % max. |
| Heavy Metals as Pb | 0.001 % max. |
| Manganese as Mn | 0.001 % max. |
Micronized Zinc Oxide with particle size not exceeding 45 micron (325 mesh) and particle size usually in the range of 1-10micron.
The company sells 4 types of Zinc Oxide.
1. Zinc Oxide 200nm EasyDisperse™ 200nm powder type with silicone coating This makes it easy to spread in any sunscreen formulation. Feels soft on the skin, clings to the skin well, gives low whiteness.
2. Zinc Oxide Micronized Powder, uncoated, suitable for use in formulations for antiseptic action such as deodorant formulations. Not suitable for use in sunscreens. that require high dispersion to achieve good sun protection performance
3. Zinc Oxide 35nm Liquid The particle size of the powder is 35 nanometers, ready to be mixed in any sunscreen formula, easy to use, feels soft on the skin, sticks to the skin well, does not cause whiteness on the skin.
4. Zinc Oxide Nano EasyDisperse™ Powder type smaller than 200nm, silicone coated. This makes it easy to spread in any sunscreen formulation. Feels soft on the skin, clings to the skin well, gives the lowest whiteness
Recommendations for use in various products
sunscreen who want to focus on the effectiveness of sunscreen and does not require whiteness on the skin as an emulsion in the oil-in-water system used Zinc Oxide Nano EasyDisperse™
sunscreen who want to focus on the effectiveness of sunscreen and does not require whiteness on the skin as an emulsion in the water-in-oil system used Zinc Oxide 35nm Liquid
sunscreen who want to claim that it is non-nano Zinc Oxide, choose to use Zinc Oxide 200nm EasyDisperse™
Diaper rash products, deodorant or deodorant/deodorant, or disinfectant are available. Zinc Oxide Micronized
Use: for sunscreen products and diaper rash prevention products
Mixing method: mix in water By spinning at high speed, the Zinc Oxide powder is dispersed as much as possible.
Usage rate: 1-25% (for diaper rash prevention use 10-15%, for deodorant use 15-20%)
Product characteristics: White to light yellow powder, light weight, small particles.
Solubility: Can be dispersed in formulations by disperse in water. High HLB emulsifiers will help disperse better.
Storage: For long term storage Store at room temperature At least 3 years old
INCI Name : Zinc Oxide
Be the first to review this product :-)
Recommend Lab-Service
| Lab Service | Price |
|---|
Zinc Oxide (Micronized)
Micronized Zinc Oxide For use in diaper rash cream formulations. deodorant etc.
Micronized Zinc Oxide with particle size not exceeding 45 micron (325 mesh) and particle size usually in the range of 1-10micron.
The company sells 4 types of Zinc Oxide.
1. Zinc Oxide 200nm EasyDisperse™ 200nm powder type with silicone coating This makes it easy to spread in any sunscreen formulation. Feels soft on the skin, clings to the skin well, gives low whiteness.
2. Zinc Oxide Micronized Powder, uncoated, suitable for use in formulations for antiseptic action such as deodorant formulations. Not suitable for use in sunscreens. that require high dispersion to achieve good sun protection performance
3. Zinc Oxide 35nm Liquid The particle size of the powder is 35 nanometers, ready to be mixed in any sunscreen formula, easy to use, feels soft on the skin, sticks to the skin well, does not cause whiteness on the skin.
4. Zinc Oxide Nano EasyDisperse™ Powder type smaller than 200nm, silicone coated. This makes it easy to spread in any sunscreen formulation. Feels soft on the skin, clings to the skin well, gives the lowest whiteness
Recommendations for use in various products
sunscreen who want to focus on the effectiveness of sunscreen and does not require whiteness on the skin as an emulsion in the oil-in-water system used Zinc Oxide Nano EasyDisperse™
sunscreen who want to focus on the effectiveness of sunscreen and does not require whiteness on the skin as an emulsion in the water-in-oil system used Zinc Oxide 35nm Liquid
sunscreen who want to claim that it is non-nano Zinc Oxide, choose to use Zinc Oxide 200nm EasyDisperse™
Diaper rash products, deodorant or deodorant/deodorant, or disinfectant are available. Zinc Oxide Micronized
Use: for sunscreen products and diaper rash prevention products
Mixing method: mix in water By spinning at high speed, the Zinc Oxide powder is dispersed as much as possible.
Usage rate: 1-25% (for diaper rash prevention use 10-15%, for deodorant use 15-20%)
Product characteristics: White to light yellow powder, light weight, small particles.
Solubility: Can be dispersed in formulations by disperse in water. High HLB emulsifiers will help disperse better.
Storage: For long term storage Store at room temperature At least 3 years old
INCI Name : Zinc Oxide
| Mechanism | - |
| Appearance | - |
| Longevity | - |
| Strength | - |
| Storage | - |
| Shelf Life | - |
| Allergen(s) | - |
| Dosage (Range) | - |
| Recommended Dosage | - |
| Dosage (Per Day) | - |
| Recommended Dosage (Per Day) | - |
| Mix Method | - |
| Heat Resistance | - |
| Stable in pH range | - |
| Solubility | - |
| Product Types | - |
| INCI | - |
Cart
No products
Subtotal:
฿0.00
฿0.00
Total :