Water-in-Oil Balance™ (e.q. Mirasil Balance)

Product Code: 127630

Promotes stable water-in-oil and water-in-silicone emulsions (HLB ≈ 5)

Price: ฿35.00 This special price only valid for web order

Size: gram (minimum 0 gram)

Unit price will be cheaper for larger size

The price will be calculated based on the size you enter

Quantity: piece(s), Packing Cost: 0/pcs

The product will be packed based on the requested quantity

Item	Document
Water-in-Oil Balance™ (e.q. Mirasil Balance)	[Product Info] [Specification] [MSDS]

Mechanism:-
Apperance:-
Longevity:-
Strength:-
Storage:-
Shelf Life:-
Allergen(s):-
Dosage (Range):-
Recommended Dosage:-
Dosage (Per Day):-
Recommended Dosage (Per Day):-
Mix Method:-
Heat Resistance:-
Stable in pH range:-
Solubility:-
Product Types:-
INCI:-

Product Specification:-

Test Name	Specification
1. Appearance	Colorless transparent to light yellow translucent liquid
2. Viscosity (mPa.s)	800-2300
3. Dry content (1g 1h 125C) %	Limit Lower 90.00
4. Refractive Index	1.4300-1.4430

Water-in-Oil Balance™ (e.q. Mirasil Balance) (Cetyl PEG/PPG-10/1 Dimethicone)

Primary Functions

Emulsifier: Promotes stable water-in-oil and water-in-silicone emulsions (HLB ≈ 5).
Skin Conditioning: Imparts a silky, non-greasy slip and improves spreadability.
Surfactant/Cleansing: Lowers interfacial tension for even product distribution.

Typical Usage Levels

Practical Range: 1–3 wt % in most leave-on emulsions (foundations, BB/CC creams, lotions); cold-process friendly.
Extended Range: Up to 5–10 % in heavier creams or rinse-off products, subject to stability testing.

Formulation Tips

Phase & Temperature: Add to the oil or silicone phase at ~60–70 °C. Cold-process is possible if mixing energy is sufficient.
Mixing: Use moderate to high shear to achieve fine droplet size and long-term stability.
Compatibility: Broadly compatible with oils, UV filters, pigments, and actives thanks to its non-ionic, branched-chain structure.

Usage: As a binder for water and oil and silicone, can be used in all formulas.

How to mix: Mix in oil well. Then the water is gradually added to the oil. Please read further details above, the formula should include 1% Magnesium Sulfate to help increase the stability of the Water-in-Oil Emulsion.

Usage rate: 0.1-4% (1-2% recommended for most formulas)

Product characteristics: Clear, thick, light yellow liquid.

Solubility: Can be dissolved in oil.

Storage: Can be stored at room temperature. But close the bottle cap tightly. Then completely protected from sunlight or heat.

INCI Name : Cetyl PEG/PPG-10/1 Dimethicone

Be the first to review this product :-)

Please login to write a review.

Recommend Lab-Service

Lab Service	Price