SPF Protect Ultra™ II

(The company provides free SPF measurement of the formula if the formula uses this sunscreen. Please ask for more information about sending SPF measurements by the company's lab at Customer Service. by clicking contact us top of the screen)

SPF Protect Ultra ™ II was developed from SPF Protect Ultra ™ which has higher sun protection efficiency to less consumption enabling the development of sunscreen formulas high efficiency but with a high lightness without using Alcohol by SPF Protect Ultra ™ II is highly stable. Not easy to deteriorate when exposed to UVA/UVB 

 

Table of protection against UVA, UVB rays at the SPF Protect Ultra™ II level of 10-20%.

SPF Protect Ultra ™ II 15% = SPF50, PA++ (minimum value)

  SPF Protect Ultra ™ II 30% = SPF90, PA++ (minimum value) 

 

Differences between SPF Protect Ultra™ and SPF Protect Ultra™ II

-   SPF Protect Ultra ™ An emollient such as any type of LipidSoft is required in the formulation to aid dissolution and dispersion.   SPF Protect Ultra ™ in the formula to achieve the specified SPF value.   but   SPF Protect Ultra ™ II is not required as the emollient component is already included. 

-   SPF Protect Ultra ™ II provides higher SPF/PA at the same application rate.

Examples of sunscreen formulas SPF Protect Ultra™ II 15%

1. SPF Protect Ultra II 15%

2. Milk Lotion Maker 3%

3. Satin Cream Maker 0.7%

4. Water 80.3%

5. Mild Preserved Eco 1%

step:

Mix 1+2 together by warming up to 70 degrees and blending or stirring until homogeneous. part of the oil

Warm up 4 to 60-70 degrees hot as part of the water.

spinning part of the oil and while spinning Gradually add the water into the oil. Blend for at least 15 minutes.

Add 3, whisk until completely dissolved. The meat will thicken, then add 5 and blend together.

SPF Result: 50.95, PA++ (See SPF Measurement Requirements and Measurement Standards below.) 

 

Examples of sunscreen formulas SPF Protect Ultra™ II 30%

1. SPF Protect Ultra II 30%

2. Milk Lotion Maker  3%

3. Satin Cream Maker 0.7%

4. Water 65.3%

5. Mild Preserved Eco 1%

step:

Mix 1+2 together by warming up to 70 degrees and blending or stirring until homogeneous. part of the oil

Warm up 4 to 60-70 degrees hot as part of the water.

spinning part of the oil and while spinning Gradually add the water part to the oil part. Blend for at least 15 minutes.

Add 3, whisk until completely dissolved. The meat will thicken, then add 5 and blend together.

SPF Result: 90.81, PA++ (See SPF Measurement Requirements and Measurement Standards below.) 

 

FDA rules for substance use SPF Protect Ultra II ™ In any kind of cosmetics

Europe and Asia (including Thailand): no more than 30%

United States: no more than 22.5%

Japan: no more than 60%

 

Finished sunscreen products with SPF Protect Ultra II ™  As a sunscreen, do not refrigerate, refrigeration will increase the sun protection efficiency of the sunscreen group. Organic/Chemical decrease in efficiency due to recrytalization

 

Utilization rate: 1-30%

nature: Yellow-brown viscous liquid

Mixing: soluble in oil Please use heat 70-80 degrees to melt to match the formula. in order to get full sun protection performance (Please study the sample formula and mixing method above.)

Storage: store at room temperature Avoid sunlight, valid for 2 years.



INCI:    Octyl methoxycinnamate, C12-15 Alkyl Benzoate, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Neopentyl Glycol Diheptanoate, Ethylhexyl Triazone