ThixoGel™ (Thixotropic Gel Maker)

  • Product Code: 740

Can create a thick but liquid gel texture is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations

฿48.00 This special price only valid for web order
gram (minimum 0 gram)

Unit price will be cheaper for larger size

The price will be calculated based on the size you enter

  •  
piece(s), Packing Cost: 0฿/pcs

The product will be packed based on the requested quantity

  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
Test Name Specification
Appearance White to light yellow powder
1% aq. viscosity (mPa.s.) 1000-5000
Cloud Point (C) 60.0<=
Moisture (%) <=1.50
Ignition Residue (%) <=0.2
Heavy Metals (ppm) <=20
Arsenic (ppm) <=2
I.R. -

ThixoGel™ can create Thick but liquid gel is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations Since it is non-ionic, it has no charge.

 

Thixotropic Gel is a thick gel. when left alone But when squeezed or pumped, it flows out easily like a liquid.

 

Thixotropic characteristics, or a high thickening effect when left unattended. It can help stabilize the formula well. It is very popular in sunscreen or make-up formulas that need to suspend pigments or sunscreen powder (titanium dioxide, zinc oxide) and the main highlight is that it is commonly used in spray formulations because when sprayed, it can be dispersed into aerosol But when left still good no stratification

 

ThixoGel™ is electrolyte resistant and has a wide pH range of 2-10, so it can be used in all formulations. without limitation

 

in the mixing process Must use heat to help dissolve while spinning continuously. Dissolve completely until clear and thick. then turn off the heat If heat is not used will not be able to dissolve and does not cause a gel texture Avoid using heat above 80 degrees because it will damage the polymer.

 

Use: as a thickener to create a gel texture to the water-based formula (water-based gel).

Mixing method: Mix in water (water-phase). need to use heat to help melt Do not exceed 80 degrees

Usage rate: 0.1-3.0% (1.0% recommended for general gel)

Product characteristics: white powder

Solubility: can dissolve in water

Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 3 years

 

INCI Name : Polyurethane-62

Be the first to review this product :-)

Please login to write a review.

Example recipes using this ingredient:

Recommend Lab-Service
Lab Service Price
ThixoGel™ (Thixotropic Gel Maker)

Can create a thick but liquid gel texture is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations

ThixoGel™ can create Thick but liquid gel is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations Since it is non-ionic, it has no charge.

 

Thixotropic Gel is a thick gel. when left alone But when squeezed or pumped, it flows out easily like a liquid.

 

Thixotropic characteristics, or a high thickening effect when left unattended. It can help stabilize the formula well. It is very popular in sunscreen or make-up formulas that need to suspend pigments or sunscreen powder (titanium dioxide, zinc oxide) and the main highlight is that it is commonly used in spray formulations because when sprayed, it can be dispersed into aerosol But when left still good no stratification

 

ThixoGel™ is electrolyte resistant and has a wide pH range of 2-10, so it can be used in all formulations. without limitation

 

in the mixing process Must use heat to help dissolve while spinning continuously. Dissolve completely until clear and thick. then turn off the heat If heat is not used will not be able to dissolve and does not cause a gel texture Avoid using heat above 80 degrees because it will damage the polymer.

 

Use: as a thickener to create a gel texture to the water-based formula (water-based gel).

Mixing method: Mix in water (water-phase). need to use heat to help melt Do not exceed 80 degrees

Usage rate: 0.1-3.0% (1.0% recommended for general gel)

Product characteristics: white powder

Solubility: can dissolve in water

Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 3 years

 

INCI Name : Polyurethane-62

Mechanism -
Appearance -
Longevity -
Strength -
Storage -
Shelf Life -
Allergen(s) -
Dosage (Range) -
Dosage (Per Day) -
Mix Method -
Heat Resistance -
Stable in pH range -
Solubility -
Product Types -
INCI -

Cart

No products

Subtotal: ฿0.00
฿0.00 Total :