ThixoGel™ (Thixotropic Gel Maker)
- Product Code: 740
Can create a thick but liquid gel texture is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Appearance | White to light yellow powder |
1% aq. viscosity (mPa.s.) | 1000-5000 |
Cloud Point (C) | 60.0<= |
Moisture (%) | <=1.50 |
Ignition Residue (%) | <=0.2 |
Heavy Metals (ppm) | <=20 |
Arsenic (ppm) | <=2 |
I.R. | - |
ThixoGel™ can create Thick but liquid gel is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations Since it is non-ionic, it has no charge.
Thixotropic Gel is a thick gel. when left alone But when squeezed or pumped, it flows out easily like a liquid.
Thixotropic characteristics, or a high thickening effect when left unattended. It can help stabilize the formula well. It is very popular in sunscreen or make-up formulas that need to suspend pigments or sunscreen powder (titanium dioxide, zinc oxide) and the main highlight is that it is commonly used in spray formulations because when sprayed, it can be dispersed into aerosol But when left still good no stratification
ThixoGel™ is electrolyte resistant and has a wide pH range of 2-10, so it can be used in all formulations. without limitation
in the mixing process Must use heat to help dissolve while spinning continuously. Dissolve completely until clear and thick. then turn off the heat If heat is not used will not be able to dissolve and does not cause a gel texture Avoid using heat above 80 degrees because it will damage the polymer.
Use: as a thickener to create a gel texture to the water-based formula (water-based gel).
Mixing method: Mix in water (water-phase). need to use heat to help melt Do not exceed 80 degrees
Usage rate: 0.1-3.0% (1.0% recommended for general gel)
Product characteristics: white powder
Solubility: can dissolve in water
Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 3 years
INCI Name : Polyurethane-62
Be the first to review this product :-)
Example recipes using this ingredient:
- › lock_outlineAnti-Acne Serum
- › lock_outlineDragon Blood Advance
- › lock_outlineBrightening Serum
- › lock_outlineAge Resist AC Care LC 2022.02
- › lock_outlineCare me premium whitening lotion
- › lock_outlineAge Resist AOX Biotic LC
- › lock_outlineSuper AOX C E Ferulic Serum in Cream
- › lock_outlineGlamour Skin My Daily Treatment
- › lock_outlineCHANCE SKIN ACNE FIGHTING SERUM
Recommend Lab-Service
Lab Service | Price |
---|
Can create a thick but liquid gel texture is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations
ThixoGel™ can create Thick but liquid gel is a gel-like texture that makes the product attractive and increase the stability of the formula as well Resistant to acid-base and electrolyte in all formulations Since it is non-ionic, it has no charge.
Thixotropic Gel is a thick gel. when left alone But when squeezed or pumped, it flows out easily like a liquid.
Thixotropic characteristics, or a high thickening effect when left unattended. It can help stabilize the formula well. It is very popular in sunscreen or make-up formulas that need to suspend pigments or sunscreen powder (titanium dioxide, zinc oxide) and the main highlight is that it is commonly used in spray formulations because when sprayed, it can be dispersed into aerosol But when left still good no stratification
ThixoGel™ is electrolyte resistant and has a wide pH range of 2-10, so it can be used in all formulations. without limitation
in the mixing process Must use heat to help dissolve while spinning continuously. Dissolve completely until clear and thick. then turn off the heat If heat is not used will not be able to dissolve and does not cause a gel texture Avoid using heat above 80 degrees because it will damage the polymer.
Use: as a thickener to create a gel texture to the water-based formula (water-based gel).
Mixing method: Mix in water (water-phase). need to use heat to help melt Do not exceed 80 degrees
Usage rate: 0.1-3.0% (1.0% recommended for general gel)
Product characteristics: white powder
Solubility: can dissolve in water
Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 3 years
INCI Name : Polyurethane-62
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products