The pigment changes color from black to white when spread on the skin. caused by technology encapsulation make the outside white Covered in black, when disintegrating, will change from black to white. 

The pigment changes color from black to white when spread on the skin. caused by technology encapsulation make the outside white Covered with black inside, when disintegrated, will change from black to white.

behavior When spread on the skin, it will break up and the white color will fade away. and turns black on the skin

How to use Please study in detail. to prevent the color powder from disintegrating before spreading onto the skin

1. The formula must have a pH not exceeding 6.5, if the formula has a pH higher than this, the color will disintegrate easily. and can be disintegrated in the formula before spreading on the skin

2. The formula must have a pH not lower than 5.5, if the formula has a pH lower than this, the color will be difficult to disintegrate. spreading on the skin If not strong enough The paint will not break and change color.

3. Add Magic Beads color powder in the last step. (Do not add to the water section) Avoid heat over 80 degrees, blend at low speed. if high heat or spinning with a high cycle can disintegrate and change color in the mixing process

4. The formula must contain no more than 80% water.

Use: For products that are in the form of gels or creams or lotions or have the right thickness if too liquid The pigment will precipitate.

How to mix: Please study how to use it in detail above.

Utilization rate: 0.1-3% depending on desired color intensity  

Product characteristics: White/light gray powder

Solubility: Can be dispersed in creams, serums, lotions

Storage: Avoid heat and sunlight. At least 2 years old

INCI Name : Compound