Hydroxyethyl Cellulose (HEC) (2000mPa.s) (Super Clear Gel)

  • Product Code: 10618

HEC forms a gel texture. Without the effect of electrolyte, it is suitable for formulation of gels with special electrolyte characteristics. in helping create bubbles In skin cleaning formulas such as shampoo or liquid soap, it is commonly used to create gel texture in shampoo or liquid soap.  

Ultra clear, viscous at 2,000 mPa s (cPs) at 1% in water. 

฿35.00 This special price only valid for web order
gram (minimum 0 gram)

Unit price will be cheaper for larger size

The price will be calculated based on the size you enter

  •  
piece(s), Packing Cost: 0฿/pcs

The product will be packed based on the requested quantity

  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
  • -
Test Name Specification
Loss on drying 5% Max
Sulfated Ash 1% Max
Nitrates 0.2% Max
Ashland Brookfield Viscosity (1%), mPa.s. 1500-2500
Assay - Hydroxyethoxy groups, % 30-70
pH of 1% Solution 6.0-8.5
Aldehydes, expressed as Glvoxal, mg/kg 10 Max
Viscosity, according to EP method (2%), mPa.s. 6400-11900

Hydroxyethyl Cellulose (HEC) forms a non-ionic gel without the effect of electrolyte, suitable for formulations containing electrolyte. 

 

Please use to create gel texture in cleaning formula (shampo, liquid soap). Recommended to use. HPMC because it can help increase bubbles as well 

 

Specifications

-Provides a viscosity of 2,000 mPa s (cPs) at 1% in water.

- Melts and forms a gel at about 70 degrees and dissolves well in the pH range of 8-9. The pH can be adjusted with alkali for easy dissolution, then adjust the pH down. 

- Can be used in formulations that are acidic down to pH 3 and alkaline up to pH 9.

- no smell

 

How to use:

Warm the water to 70 degrees, stir the water and gradually sprinkle the HEC powder into the hot water and continue to blend until it is completely dissolved. will get gel texture / or / Blend to disperse in cold water. Then heat up to 70 degrees while spinning continuously. when heat 70 degrees and then turn off the heat Blend continuously until cool.

 

The company sells various types of non-ionic gelling agents as follows:

1. Hydroxypropyl Methylcellulose (HPMC, USA)  It is a gel texture that gives a beautiful gel texture that is easy to use.

2. Hydroxypropyl Methylcellulose (HPMC, China)  It is an economical gelling agent. Able to provide high viscosity

3. Hydroxyethyl Cellulose (HEC, USA)   It is a gel texture that gives a beautiful gel texture that is easy to use.  Moderate thickening

 

Use: for all kinds of products who want to increase viscosity Add gel (thickening)

How to mix: Mix in water (water-phase) by using heat to 70 degrees and stirring constantly. until the gel is formed

Utilization rate: 0.5-3% (depending on the required viscosity)

Product characteristics: white powder

Solubility: Can be dissolved in warm water (70 degrees).

Storage: For long-term storage Store at room temperaturedo not expose to sunlight and avoid moisture

 

INCI Name : Hydroxyethyl Cellulose (HEC)

Be the first to review this product :-)

Please login to write a review.
Recommend Lab-Service
Lab Service Price
Hydroxyethyl Cellulose (HEC) (2000mPa.s) (Super Clear Gel)

HEC forms a gel texture. Without the effect of electrolyte, it is suitable for formulation of gels with special electrolyte characteristics. in helping create bubbles In skin cleaning formulas such as shampoo or liquid soap, it is commonly used to create gel texture in shampoo or liquid soap.  

Ultra clear, viscous at 2,000 mPa s (cPs) at 1% in water. 

Hydroxyethyl Cellulose (HEC) forms a non-ionic gel without the effect of electrolyte, suitable for formulations containing electrolyte. 

 

Please use to create gel texture in cleaning formula (shampo, liquid soap). Recommended to use. HPMC because it can help increase bubbles as well 

 

Specifications

-Provides a viscosity of 2,000 mPa s (cPs) at 1% in water.

- Melts and forms a gel at about 70 degrees and dissolves well in the pH range of 8-9. The pH can be adjusted with alkali for easy dissolution, then adjust the pH down. 

- Can be used in formulations that are acidic down to pH 3 and alkaline up to pH 9.

- no smell

 

How to use:

Warm the water to 70 degrees, stir the water and gradually sprinkle the HEC powder into the hot water and continue to blend until it is completely dissolved. will get gel texture / or / Blend to disperse in cold water. Then heat up to 70 degrees while spinning continuously. when heat 70 degrees and then turn off the heat Blend continuously until cool.

 

The company sells various types of non-ionic gelling agents as follows:

1. Hydroxypropyl Methylcellulose (HPMC, USA)  It is a gel texture that gives a beautiful gel texture that is easy to use.

2. Hydroxypropyl Methylcellulose (HPMC, China)  It is an economical gelling agent. Able to provide high viscosity

3. Hydroxyethyl Cellulose (HEC, USA)   It is a gel texture that gives a beautiful gel texture that is easy to use.  Moderate thickening

 

Use: for all kinds of products who want to increase viscosity Add gel (thickening)

How to mix: Mix in water (water-phase) by using heat to 70 degrees and stirring constantly. until the gel is formed

Utilization rate: 0.5-3% (depending on the required viscosity)

Product characteristics: white powder

Solubility: Can be dissolved in warm water (70 degrees).

Storage: For long-term storage Store at room temperaturedo not expose to sunlight and avoid moisture

 

INCI Name : Hydroxyethyl Cellulose (HEC)

Mechanism -
Appearance -
Longevity -
Strength -
Storage -
Shelf Life -
Allergen(s) -
Dosage (Range) -
Dosage (Per Day) -
Mix Method -
Heat Resistance -
Stable in pH range -
Solubility -
Product Types -
INCI -

Cart

No products

Subtotal: ฿0.00
฿0.00 Total :