Electrode for Digital pH meter, laboratory, desktop, precision, 2 positions
- Product Code: 126010
Electrode for benchtop pH meter, resolution 2
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Electrode for benchtop pH meter, resolution 2
(This product is only sold to customers who bought a pH meter from the company.)
PH can be measured in the 0-14 pH range or better.
Measurement resolution pH 0.01 pH
Measure the potential difference in the range of ± 1,800 mV.
Resolution of measurement of potential difference 1 mV
Reliability ± 0.01pH ± 1bit / 3h
Used with Benchtop pH meter only
Cleaning Procedures If the electrode becomes sluggish, or has been determined to be bad, clean the electrode by following the directions below.
General
Soak in 0.1M HCl or 0.1M HNO3 for half an hour.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Inorganic
Soak in 0.1M tetrasodium EDTA solution 15 minutes.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Protein
Soak in 1% pepsin in 0.1M HCl for 15 minutes.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Grease and Oil
Rinse with mild detergent or methanol solution.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Be the first to review this product :-)
Recommend Lab-Service
Lab Service | Price |
---|
Electrode for benchtop pH meter, resolution 2
Electrode for benchtop pH meter, resolution 2
(This product is only sold to customers who bought a pH meter from the company.)
PH can be measured in the 0-14 pH range or better.
Measurement resolution pH 0.01 pH
Measure the potential difference in the range of ± 1,800 mV.
Resolution of measurement of potential difference 1 mV
Reliability ± 0.01pH ± 1bit / 3h
Used with Benchtop pH meter only
Cleaning Procedures If the electrode becomes sluggish, or has been determined to be bad, clean the electrode by following the directions below.
General
Soak in 0.1M HCl or 0.1M HNO3 for half an hour.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Inorganic
Soak in 0.1M tetrasodium EDTA solution 15 minutes.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Protein
Soak in 1% pepsin in 0.1M HCl for 15 minutes.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Grease and Oil
Rinse with mild detergent or methanol solution.Drain and refill the Electrode Filling Solution.Soak the electrode in Filling or Storage Solution for 1 hour.
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products