WaterLube™ Slip (e.q. Emogel Oil, Lubrajel Oil)
- Product Code: 6187
Glyceryl Acrylate/ Acrylic Acid Copolymer was developed to solve water gel formulations. that tend to leave a sticky feeling on the skin when applied unable to cause smoothness The formula is still a clear gel texture. not opaque This happens if any emollient or silicone is added to the water gel.
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Appearance (25C) | Clear, colorless and low viscosity liquid |
Viscosity (cps, 22C, Brookfield DV-II, #3, 50RPM) | 500-1600 |
Refractive Index (20-24C) | 1.380-1.410 |
Total Bacteria Count (MTM-110) | Max 100CFU/g |
Mold and Yeats (MTM-112) | Max 100CFU/g |
S.Aureus (USP61) | Absent |
E.Coli (USP61) | Absent |
P.Aeruginosa (USP61) | Absent |
Salmonella SP (USP61) | Absent |
WaterLube™ Slip (popularly Lubrajel Oil or Emogel Oil) was developed to solve the problem of water gel formulations. that tend to leave a sticky feeling on the skin when applied unable to cause smoothness The formula is still a clear gel texture. not opaque This happens if any emollient or silicone is added to the water gel.
It is often referred to under other trade names as Cinnogel. Oil or Lubrachel Oil But not produced by that company
WaterLube™ is ideal for skin toning. Touch of watery gel texture. Or any water-based formula that still wants the formula to be as clear as before
WaterLube™ was able to moisturize the skin as shown in the experiments shown below.
WaterLube™ Slip Can be used to increase the smoothness of the touch surface. to the cream or serum formula, but it is not worth choosing to use because if it is a cream or serum formula who can use oil or silicone. Using silicone or oil ( LipidSoft Emollient ) has a wider range of options. WaterLube™ is suitable for water based formulations. who only want clear formula meat, which has no other options
The company sells two types of WaterLube™:
1. WaterLube™ Slip Focusing on smoothness It looks like a clear thick liquid.
2. WaterLube™ Soft focus on softness It looks like a thick clear gel.
Use: Used to create softness and smoothness to the skin in any formula.
How to mix: Mix together in the water.
Utilization rate: 0.1-5.0%
Product characteristics: clear liquid
Solubility: can dissolve in water
Storage: can be stored at room temperature But close the bottle cap tightly. Then completely covered from sunlight or heat, the product is at least 2 years old.
INCI Name : Glycerin (and) Glyceryl Acrylate/Acrylic Acid Copolymer (and) Propylene Glycol (and) PVM/MA Copolymer
Be the first to review this product :-)
Example recipes using this ingredient:
- › lock_outlinePeteempa Serum
- › lock_outlineATA Serum
- › lock_outlineComplete Whitening Gel
- › lock_outlinePost Procedure Water Essence
- › lock_outlineRoutinol Ultimate Reviving Serum
- › lock_outlineFirst Clear Water Essence
- › lock_outlineUltimate Reviving Serum
- › lock_outlineMicro Peel Salmon Gel
- › lock_outlineComplete Whitening Gel 2020.10
- › lock_outlineAge Resist Day Care
- › lock_outlineStrong and Balance Essence
- › lock_outlineSerum Night G
- › lock_outlinebuaelyn peeling
- › lock_outlinebuaelyn peeling 2
Recommend Lab-Service
Lab Service | Price |
---|
Glyceryl Acrylate/ Acrylic Acid Copolymer was developed to solve water gel formulations. that tend to leave a sticky feeling on the skin when applied unable to cause smoothness The formula is still a clear gel texture. not opaque This happens if any emollient or silicone is added to the water gel.
WaterLube™ Slip (popularly Lubrajel Oil or Emogel Oil) was developed to solve the problem of water gel formulations. that tend to leave a sticky feeling on the skin when applied unable to cause smoothness The formula is still a clear gel texture. not opaque This happens if any emollient or silicone is added to the water gel.
It is often referred to under other trade names as Cinnogel. Oil or Lubrachel Oil But not produced by that company
WaterLube™ is ideal for skin toning. Touch of watery gel texture. Or any water-based formula that still wants the formula to be as clear as before
WaterLube™ was able to moisturize the skin as shown in the experiments shown below.
WaterLube™ Slip Can be used to increase the smoothness of the touch surface. to the cream or serum formula, but it is not worth choosing to use because if it is a cream or serum formula who can use oil or silicone. Using silicone or oil ( LipidSoft Emollient ) has a wider range of options. WaterLube™ is suitable for water based formulations. who only want clear formula meat, which has no other options
The company sells two types of WaterLube™:
1. WaterLube™ Slip Focusing on smoothness It looks like a clear thick liquid.
2. WaterLube™ Soft focus on softness It looks like a thick clear gel.
Use: Used to create softness and smoothness to the skin in any formula.
How to mix: Mix together in the water.
Utilization rate: 0.1-5.0%
Product characteristics: clear liquid
Solubility: can dissolve in water
Storage: can be stored at room temperature But close the bottle cap tightly. Then completely covered from sunlight or heat, the product is at least 2 years old.
INCI Name : Glycerin (and) Glyceryl Acrylate/Acrylic Acid Copolymer (and) Propylene Glycol (and) PVM/MA Copolymer
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products