WaterBreaker™ (e.q. Supersil 5500, WaterDropSil)
- Product Code: 11119
self-emulsifying silicone that allows the creation of water break cream, or what is technically called Macro emulsion. When spreading the cream created with When WaterBreaker™ is applied to the skin, a large number of water droplets will form.
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Appearance | Colorless or translucence |
Odor | Slight characteristics odor |
Viscosity at 25C | 200-2000 |
Non volatile content (%, 105C, 3hr) | 36-44 |
Heavy Metals | 20ppm Max |
Arsenic | 2ppm Max |
WaterBreaker™ (eq Supersil 5500 or WaterDropSil) is a self-emulsifying silicone that allows the creation of water break cream (water break) or popularly known technically as Macro emulsion. When spreading the cream created with When WaterBreaker™ is applied to the skin, a large number of water droplets will form.
In the process of cementing the formula Do not blend at high speed. Do not use a homogenizer. Use a disperser blender head and blend at a low speed.
High sample creamy cum
silicone part:
Water part:
water
Sodium Chloride 0.5%
Mix the silicone ingredients together.
Mix the water ingredients together.
While blending the silicone, slowly add the water, a little at a time, until it's all gone. Do not add all at once.
Do not use the homogenizer head for blending, it is recommended disperser head Spin at a speed not exceeding 1000 rpm To make the water drop bigger In the case of using a blender head, the homogenizer will make the water droplets smaller or less.
Usage: It is a substance that binds water to oil and silicone in water-in-oil / water-in-silicone systems.
Mixing method: Mix in the silicone well, then gradually add the water to the silicone (if there is oil, mix the oil into the silicone together first, then mix the water together) in the step of adding water. in the formula Add it gradually, a little at a time. and spin at low speed Do not blend at high speed. Do not use a homogenizer.
Usage rate: 5-10% (use rate is too low It may cause the formula to clump together, the rate of use will be higher. will make the formula more liquid)
Product characteristics: Clear, semi-opaque thick substance
Solubility: Can be spread in oil or silicone.
Storage: Can be stored at room temperature But close the bottle cap tightly. Then completely protected from sunlight or heat. The product has a minimum shelf life of 2 years.
INCI Name : Cyclopentasiloxane, PEG-10 Dimethicone/Vinyl Dimethicone Crosspolymer
Be the first to review this product :-)
Recent dicussion threads:
Recommend Lab-Service
Lab Service | Price |
---|
self-emulsifying silicone that allows the creation of water break cream, or what is technically called Macro emulsion. When spreading the cream created with When WaterBreaker™ is applied to the skin, a large number of water droplets will form.
WaterBreaker™ (eq Supersil 5500 or WaterDropSil) is a self-emulsifying silicone that allows the creation of water break cream (water break) or popularly known technically as Macro emulsion. When spreading the cream created with When WaterBreaker™ is applied to the skin, a large number of water droplets will form.
In the process of cementing the formula Do not blend at high speed. Do not use a homogenizer. Use a disperser blender head and blend at a low speed.
High sample creamy cum
silicone part:
Water part:
water
Sodium Chloride 0.5%
Mix the silicone ingredients together.
Mix the water ingredients together.
While blending the silicone, slowly add the water, a little at a time, until it's all gone. Do not add all at once.
Do not use the homogenizer head for blending, it is recommended disperser head Spin at a speed not exceeding 1000 rpm To make the water drop bigger In the case of using a blender head, the homogenizer will make the water droplets smaller or less.
Usage: It is a substance that binds water to oil and silicone in water-in-oil / water-in-silicone systems.
Mixing method: Mix in the silicone well, then gradually add the water to the silicone (if there is oil, mix the oil into the silicone together first, then mix the water together) in the step of adding water. in the formula Add it gradually, a little at a time. and spin at low speed Do not blend at high speed. Do not use a homogenizer.
Usage rate: 5-10% (use rate is too low It may cause the formula to clump together, the rate of use will be higher. will make the formula more liquid)
Product characteristics: Clear, semi-opaque thick substance
Solubility: Can be spread in oil or silicone.
Storage: Can be stored at room temperature But close the bottle cap tightly. Then completely protected from sunlight or heat. The product has a minimum shelf life of 2 years.
INCI Name : Cyclopentasiloxane, PEG-10 Dimethicone/Vinyl Dimethicone Crosspolymer
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products