Emulsifiers that are blended for higher stability, electrolyte resistance, better texture or lower cost
Balm builder (lip balm, butterbalm, lipstick) with up to 10% water binding in the formula (90% oil or wax).
lecithin powder pure from soy Create a creamy texture. from 100% natural ingredients for the product such as lip balm, cream, lotion
Water-oil co-ordination emulsifier in the water-in-oil system is highly stable. At cool-hot temperatures Polyglyceryl-4 Isostearate (and) Cetyl PEG / PPG-10/1 Dimethicone (and) Hexyl Laurate
Water-oil co-ordination emulsifier in the water-in-oil system is highly stable. At cool-hot temperatures
Polyglyceryl-4 Isostearate (and) Cetyl PEG / PPG-10/1 Dimethicone (and) Hexyl Laurate
Emulsifier with a liquid formula with special features It can bind oil up to 40%, making it suitable for use in formulas that require a lot of oil, such as Sun Screen / Sun Block, sunscreen lotion.
Emulsifier with a hard and coarse formula, similar to butter, with special properties, high electrolyte resistance and a wide pH range of 3-12, able to bind oils not more than 30%.
Soft Cream Maker ™ creates a creamy, soft texture. It can be used in a wide pH range between 3-12 and also provides a creamy liquid crystal (liquid crystal) which has a nice sheen to use.
Creates a creamy, heavy texture that looks creamy but not greasy. The cream is white and shiny and can add moisture to the skin. (Moisturizing) through the coating (occlusive) to reduce the evaporation of water from the surface. Maiden
PEG-free, non-ionic, water-in-oil and natural-derived emulsifier. (Not directly from nature But using natural ingredients Came through a chemical process) ECOCERT-CERTIFIED
PEG-free, non-ionic, water-in-oil and natural-derived emulsifier. (Not directly from nature But using natural ingredients Came through a chemical process)
ECOCERT-CERTIFIED
Glyceryl Stearate and PEG-100 Stearate are emulsifiers that are commonly used in a wide range of products. Due to its affordable price, it has an HLB value of about 11.0. Maiden
PEG-Free, Non-ethoxylated creamy substance thus reducing the chance of skin irritation ECOCERT-CERTIFIED
PEG-Free, Non-ethoxylated creamy substance thus reducing the chance of skin irritation
ECOCERT-CERTIFIED
Liquid Crystal Cream Maker is an oil in water emulsifier that can create a Liquid Crystal structure for the formula. Liquid Crystal is an emulsion structure that is similar to the water/fat structure under our skin, allowing it to penetrate into the skin well. Reduce irritation that is likely to occur in other emulsion forms.
Glyceryl Stearate Citrate is a naturally derived emulsifier (oil in water) (caution: it is natural-derived It cannot be claimed to be 100% natural because although it is of natural origin. But have to go through a chemical process to get Glyceryl Stearate Citrate
Natural emulsifier / cream maker formed from special grade Hydrogenated Lecithin (HL) with high emulsify efficiency compared to conventional HL.
It is used to create a creamy formula containing silicones, oils and water. It can contain oils and silicones greater than 50% of the formula and provides a creamy texture that absorbs quickly from the skin. Leaves softness on the skin
It is used to create a cream with silicone based (over 50%) and water based (below 50%), providing a creamy texture that absorbs quickly from the skin. and leaves a smooth, powder-like texture on the skin
Silicone Blender acts as a synchronization. Different types of silicone together, such as Silicone Gel Ultra Clear With
Serum base, soft, smooth, ultra-fast absorbing. When spread over the skin, it can be absorbed into the skin immediately within seconds. Can be mixed with water (and water-soluble ingredients). in the ratio of 30-90% and will become a serum immediately ( Please study the mixing method in detail below. )
Serum base type, soft, smooth, absorbs quickly, special Able to coordinate the oil in the formula When spread over the skin, it can be absorbed into the skin immediately within seconds. Can be mixed with water (and other water-soluble ingredients) in the ratio of 30-90% and oil in the ratio not exceeding 30% And will immediately become a serum ( Please study the mixing method carefully...
Highly efficient water-in-oil emulsifier It is produced by mixing two types of emulsifiers to form a highly stable water-in-oil emulsion.
self-emulsifying silicone that allows the creation of water break cream or technically called Macro emulsion. When spreading the cream created with When WaterBreaker™ is applied to the skin, a large number of water droplets will form.
A binder, a cream (emulsifier) and a thickener that does not require heat. It can be used in the pH range between 2.5-11 and can produce up to 10% oil. Easy to use, just mix in oil-phase in case of oil-phase or can be mixed in water-phase without oil-phase ( Which will act as a thickener)
A binder, a cream (emulsifier) and a thickener that does not require heat. It can be used in the pH range between 3-11 and can produce up to 5% oil. Easy to use, just mix in oil-phase in case of oil-phase or can be mixed in water-phase without oil-phase (which Will act as a thickener)
A binder, cream (emulsifier) and a thickener that can work without the use of heat. It can be used in a pH range between 3-11 and can produce 10% oil. Easy to use.
Emulsifier oil in water system that was developed. Due to the base structure of silicone (Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone) it has a special, soft and smooth texture on its own, making it suitable for any skin care regimen. that want to have a soft and smooth touch surface Minimizes the greasiness from the formula components.
A semi-solid gel-forming agent that can give a clear gel texture. for water formula and can cement oil about 15-20%
Emulsifiers and thickeners that do not require heat Can be used in a pH range of 2.5-11 and can contain up to 20% oil. Easy to use, just mix in the oil-phase in case of oil-phase, or can mix in water-phase without oil-phase ( which will act as a thickener)
For creating a creamy, silky texture, easy to use, create a gel texture within 5 minutes, no heat required.
high efficiency emulsifier That can bind up to 40% of the oil and the lightness of the formula So it can be used to bind the spray Able to solder with cold-process (no heat use for mixing) ECOCERT-CERTIFIED
high efficiency emulsifier That can bind up to 40% of the oil and the lightness of the formula So it can be used to bind the spray Able to solder with cold-process (no heat use for mixing)
Cream building substance It can handle 1% to 80% oil in formulations. It has a high build capacity polymeric structure that can hold up to 80% oil in formulations with high stability
Water-oil binders It is liquid-type, easy to use, can be used for both hot-process and cold-process integration.
water-oil binder It has a creamy texture, easy to use, can be used in combination with both hot-process and cold-process. and helps protect the skin Reduces skin irritation Help bring the ingredients in the formula into the skin very well Able to bind up to 20% oil
water-oil binder It has a creamy texture, easy to use, can be used in combination with both hot-process and cold-process. and helps protect the skin Reduces skin irritation Help bring the ingredients in the formula into the skin very well
Able to bind up to 20% oil
No products