Hello
Nano Silver Solution (500ppm) can be used as is
สารกันเสีย in the formula, but using it in the formula will make The formula is yellow (more - less depending on the rate of use, in which case you want to use it as
สารกันเสีย in the formula, recommend 1-2% step) formula I have the following problems: 1.
Cholesterol will require very high heat (approximately 120-130 degrees) to dissolve into the formula. while multiple elements cannot withstand heat This makes mixing difficult (can be done if the problem is not encountered in step 2,3,4, but the mixer must be proficient. and have the right equipment For example, a furnace that can control the temperature accurately) 2. Be careful about the suitability of use. For example, use
BioSulphur EQ, which is dark and odorous, is used in this formula. This makes the formula suitable for use at night. rather than using it during the day Because some ingredients such as
Cholesterol is sticky. (Depending on the rate of use as well) 4. The formula has no water problem. Some ingredients are therefore unable to dissolve as suggested by modtanoy21. If members can inform the purpose of the formula The team may be able to help optimize and ease the mix.