Browse Questions and Answers
Avg response: 24 HrsFilter Questions
20 of 14238 results
Hello, I would like to order production from the Recipe Hub. My skin is quite oily, with slightly wide pores on my cheeks. I have a few pimples near my eyes. One side of my cheek feels a bit uneven, but without acne. I am currently using and like the **Stabilized Vitamin C Serum**. I would like to order other products as well. For serums, I am considering **Care & White Serum by kritpecharat** and **Oil Control Serum**. Which one would help reduce facial oiliness (without drying), tighten pores, promote healthy skin, and be suitable for long-term use? For moisturizing creams, I am considering **Activated skincare by polly** and **Resveratrol Gel**. Which one would be more suitable for my skin type?
In a 100% formulation, what is the maximum total percentage of multiple active ingredients that can be included?
I would like to inquire about making an air freshener spray for sale. The formulation is as follows: * Alcohol 95% (70%) * Distilled Water (15%) * Fragrance (15%) Is it necessary to add a preservative? If so, please recommend a suitable preservative for this product and the usage percentage. Thank you.
Could you please help me understand the function of each ingredient in the following formulation? **Active Ingredients:** * Zinc Oxide 13% **Inactive Ingredients:** * Water * Tetradecane * Cetearyl Nonanoate * Ethylhexyl Palmitate * Caprylic/capric triglyceride * Isopropyl Palmitate * Isopropyl Myristate * Glycerin * Polyglyceryl-3 Diisostearate * Mica * Propanediol * Disteardimonium Hectorite * Gluconolactone * Polyglyceryl-6 Polyricinoleate * Brassica Campestris/ Aleurites Fordi Oil Copolymer * Propanediol * Polyhydroxystearic acid * Sodium Chloride * Magnesium Sulfate * Fructose * Octyldodecyl Oleate * Tocopherol * Cocos Nucifera (Coconut) Fruit Extract * Sodium benzoate * Iron Oxides (CI 77492) * Dodecane * Hexadecane * Titanium Dioxide (CI 77891) * Withania Somnifera Flower Extract * Iron Oxides (CI 77491) * Vaccinium Angustifolium (Blueberry) Fruit Extract * Silica * Calcium Gluconate
What are the percentages of `Ethoxydiglycol` and `Butylene Glycol` in the product `Natural-C Glycol`?
I store cream in a room with an average temperature of around 30-35 degrees Celsius during the day. The packaging is a clear bottle, but it is not exposed to direct sunlight, only artificial light from lamps. After two weeks or more, the cream starts to darken in color in all formulations I've mixed, and some formulations also experience separation. Is there any ingredient that can slow down the darkening of the cream's color?
I am creating a water-based formula with the following ingredients: * Calcium Pantothenate 0.15% * Niacinamide 1.5% * Hyaluronic Acid (JP) 0.4% * Tea Tree Oil 0.25% * Mild Preserved Eco™ 0.52% * Dl-Water 97.18% I plan to use PEG-40 Hydrogenated Castor Oil to dissolve the Tea Tree Oil. I would like advice on the following: 1. Please check if my proposed mixing method is correct: 1. Mix A and B into F, stir until dissolved. 2. Mix C into F, stir until dissolved. 3. Mix D into G (PEG-40 Hydrogenated Castor Oil), stir until mixed. 4. Mix step 3 into the water phase (F). 5. Mix E into the final step, stir until clear. 2. What percentage of PEG-40 Hydrogenated Castor Oil should I use? (Reducing the water percentage accordingly) 3. Should I add antioxidants or sunscreen to the chemical ingredients? 4. If the ingredients cannot be mixed without a base, I would like recommendations for a natural, non-comedogenic gel base. (If the ingredients are compatible, you can skip this question). 5. Should any additional ingredients be added for preservation or to make the formula more effective? The intended product is for reducing acne, healing acne wounds, controlling oil, and tightening the face.
I have the following ingredient list for a cleansing gel I want to make myself. Could you please check the ingredients and advise if heat is required for mixing? Ingredient List: * Water (Aqua) * Sodium Laureth Sulfate * Sodium PEG-7 Olive Oil Carboxylate * Olive Oil PEG 7 Esters * Coco-Betaine * Potassium Lactate * PEG-120 Methyl Glucose Dioleate * Sodium Citrate * Lavandula Angustifolia (Lavender) Oil * Lactic Acid * Glycerin * Simmondsia Chinensis (Jojoba) Seed Oil * Ribes Nigrum (Blackcurrant) Seed Oil * Ormenis Multicaulis Oil * Benzyl Alcohol * Phenoxyethanol * Chamomilla Recutita (Matricaria) Flower Oil * Glycyrrhiza Glabra (Licorice) Root Extract * Magnesium Nitrate * Potassium Sorbate * Carum Petroselinum (Parsley) Seed Oil * sodium benzoate * Methylchloroisothiazolinone * Magnesium Chloride * methylisothiazolinone * Linalool * d-limonene
Is Sodium Ascorbyl Phosphate available for sale?
Could you please analyze the following ingredient list and explain the function of each component in the formulation? ``` Aqua, C12-15 alkyl benzoate, Arginine, Phenylbenzimidazole Sulfonic Acid, Disodium Phenyl Dibenzimidazole Tetrasulfonate, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Titanium Dioxide (nano), Hexylene Glycol, C14-22 Alcohols, C12-20 Alkyl Glucoside, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Nylon-12 Myristyl Alcohol, Dipropylene glycol Dibenzoate, Diethylhexyl Butamido Triazone, Phenoxyethanol, Polypodium Leucotomos Leaf Extract, Ethylhexyl Ferulate, Ferulic Acid, Caffeic Acid, Physalis Angulata Extract, Ceteareth-25, Caprylyl Glycol, Melanin, Myristyl Glucoside, Ethylhexyl Triazone, Caprylyl Methicone, Hydrolyzed Wheat Protein/PVP Crosspolymer, Glycerin, Ethyl Ascorbic acid, Alumina, PPG-15 Stearyl Ether Benzoate, Disodium Ethylene Dicocamide PEG-15 Disulfate, Camelia Sinensis Extract, Ethylhexylglycerin, Tocopheryl Acetate, Xanthan Gum, Phytosphingosine HCL, Arabidopsis Thaliana Extract, Ethyl Lauroyl Arginate HCL, Panthenyl Triacetate, Parfum, Simethicone, Oxothiazolidine, Disodium EDTA, Silica, Ethyl Linoleate, Caprylic/capric triglyceride, Oleyl Alcohol, Butylene Glycol, Lecithin, sodium benzoate, Tocopherol, Linalool, limonene. ```
I want to formulate a body balm using natural ingredients like Beeswax. What other ingredients should I add to make the texture smooth, not too sticky, and fast-absorbing?
The product page for Magnesium Ascorbyl Phosphate under "Additional Info" and "Technique" mentions mixing in the oil phase, but the "Solubility" section states it dissolves in water. I am confused if this ingredient is soluble in both water and oil. Can I mix it only in the water phase for a serum formulation that does not contain an oil phase? This is to avoid using an Emulsifier in the formula.
I would like to request a review of my proposed formula before production. I have combination, very sensitive skin that is dry but produces oil quickly. I also have clogged pores and wrinkles (age 35+). I want the product to have a gel-cream texture that is fast-absorbing, non-heavy, and non-greasy. It should be free from Silicone, color, fragrance, Alcohol, parabens, or unnecessary synthetic ingredients, as these can cause allergic reactions and clog pores. My proposed ingredients are as follows: 1. CeraTouch (Ceramide Complex) 2% 2. Cholesterol 4% 3. Phytosphingosine SA 0.2% 4. Squalane (Olive) 2% 5. Beta Glucan (Saccharomyces cerevisiae extract) 5% 6. Safe-B3™ (Vitamin B3, Niacinamide) 5% 7. GlucoBright™ (Acetyl glucosamine) 4% 8. Repair Activator™ 10% 9. WhiteCumin™ (Tetrahydrodiferuloylmethane) 0.3% 10. Glycosaminoglycans Complex 3% 11. Pro-Cysteine 2% 12. Adenosine Liposome 3% 13. Copper Peptide (GHK-Cu) 2% Given my skin type, can I use Aloe Vera Gel Heavy as the base? (To ensure fast absorption, non-greasy feel throughout the day, and prevent oiliness). Based on the list above, the total percentage of the 13 ingredients is 42.5%, and the remaining 57.5% is the base (Aloe Vera Gel Heavy). Is this understanding correct? If I don't use Aloe Vera Gel Heavy as the base, but use purified water instead for the remaining percentage, what will the texture be like? Will it absorb into the skin? Please advise if any ingredients are incompatible, unsuitable, or redundant in their efficacy, potentially making the product heavy or oily. Also, should any additional ingredients be included?
I want to formulate two types of facial cleansing products: 1. **Cleansing Water** (similar to Bioderma Sensibio H2O) Based on the ingredients of a popular brand (Bioderma Sensibio H2O): * Water (Aqua) * PEG-6 Caprylic/Capric Glycerides * Propylene Glycol * Cucumis Sativus (Cucumber) Fruit Extract * Mannitol * Xylitol * Rhamnose * Fructooligosaccharides * Disodium EDTA * Cetrimonium Bromide My planned ingredients (excluding skin-benefiting ingredients as it's only on the face briefly): * MakeUp-Wash™ (PEG-6 Caprylic/Capric Glycerides) 3% (Is this sufficient as the only cleansing agent for moderate makeup like foundation and powder?) * Propylene Glycol (What percentage should I use?) * Water (Add up to 100%) * Phenoxyethanol 0.5% 2. **Foam-Free Cleanser** (similar to Cetaphil Gentle Skin Cleanser) I want to formulate a facial cleanser that is foam-free, provides slip during washing, feels clean after rinsing, and doesn't leave the skin dry or tight, similar to a popular and relatively expensive brand (Cetaphil Gentle Skin Cleanser). Based on the ingredients of the popular cleanser brand: * Water * Cetyl Alcohol * Propylene Glycol * Sodium Lauryl Sulfate * Stearyl Alcohol * Methylparaben * Propylparaben * Butylparaben My planned ingredients: * Water (Add up to 100%) * Cetyl Alcohol (What percentage should I use?) * Propylene Glycol (Can I replace it with Glycerin? What percentage should I use?) * Sodium Lauryl Sulfate (Can I replace it with Coco Glucoside 5%? Is 5% sufficient for cleansing the face in the morning and evening (after using Cleansing Water)?) * Stearyl Alcohol (I'm not sure if this is necessary, but it's not available on the website. If necessary, what can I use instead and at what percentage?) * Methylparaben, Propylparaben, Butylparaben (Can these three preservatives be replaced with Phenoxyethanol 0.5%? Or should I use 1%? I've used 1% before and felt a slight burning sensation that disappeared.)
I am developing a liquid soap formula and want to add exfoliating ingredients. I need advice on which ingredients to use and in what quantity, as I've read that some ingredients degrade when stored in water for extended periods. Could you provide recommendations?
Can these ingredients be used to formulate a cosmetic product? What are their roles and how should they be handled? * aloe barbadensis leaf juice * PEG-60 Almond Glycerides Water (Aqua) * Sorbitol * PEF-150 Distearate * Benzyl Alcohol * Phenoxyethanol * Polysorbate 20 * Lavendula Angustifolia (Lavender) Oil * Panthenol * Disodium EDTA * Citric Acid * Sodium Citrate * Vilis Vinfera (Grape) Seed Extract * Camellia Sinensis Leaf Extract * Dehydroacetic Acid * Ormenis Multicaulis Oil * Carum Petroselinum (Parsley) Seed Oil * Linalool * d-limonene
When I ordered `Reservoir-Tech` at the price of 49, the description stated it could be used with oil-soluble ingredients, specifically mentioning `Activated Resorcinol` and `Perfect-C`. I placed the order based on this. Today, I noticed the price reduced to 35, and the description now states it is for water-soluble substances. Given this change, can I still use `Reservoir-Tech` with `Perfect-C`?
Based on the provided formula, could you please provide simple mixing instructions for a water-based serum? **Formula:** * Vitamin C (L-ascorbic acid) (Ultra-Fine): 15% * Water: 83% * Mild Preserved: 1% * Xanthan Gum: 1%
I would like to know if food-grade collagen peptide powder, the type mixed with water for drinking, can be mixed directly into a lotion formula. Will it make the formula spoil easily? (For example, Soy Lecithin needs to be hydrogenated first because it can cause stability issues). I already have a natural preservative in the formula, but I'm worried it won't be sufficient because I read somewhere that opened powder, if not used completely, can spoil. How long will the shelf life be? Thank you.
Regarding the following sample Microemulsion Cleanser formula: * Oilsify 15 30% * Any oil 50% * Water 10% * Butylene Glycol 10% Can Oilsify 30 be used instead of Oilsify 15 in this formula?
