Polyglyceryl-2 dipolyhydroxystearate (e.q. Dehymuls PGPH)
- Product Code: 1923
yellow water-in-oil emulsifier Commonly used in conjunction with Oil Blender In equal proportions (3%, 3% recommended) to create / coordinate a creamy texture. With a high content of oil (more than 40%) in the formulation
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Appearance | Yellow Cloudy Viscous Liquid |
Acid Value (mg KOH/g) | Max 2 |
Hydroxyl Value (mg KOH/g) | 65-95 |
Saponification Value (mg KOH/g) | 170-190 |
Iodine Value (g l/100g) | Max 15 |
Moisture % | Max 0.5 |
HLB Value (calculated) | 5.5 |
Polyglyceryl-2 dipolyhydroxystearate
The yellow water-in-oil emulsifier has a HLB value of approximately 5.0.
Commonly used in conjunction with Oil Blender In equal proportions (3%, 3% recommended) to create / coordinate a creamy texture. With a high content of oil (more than 40%) in the formulation
Example of Diaper Rash Protective Cream formula for children using Zinc Oxide to treat diaper rash.
Polyglyceryl-2 dipolyhydroxystearate 3%
Oil Blender 3%
Beeswax 1%
Shea Nut Oil 10%
Vitamin B5 3%
Water 50%
Heavy Mineral Oil Complete 100%
Steps to use Polyglyceryl-2 dipolyhydroxystearate in a coordinated water-in-oil cream formula:
Heat and mix the oil ( Polyglyceryl-2 dipolyhydroxystearate Must be mixed in the oil part), then warm the water part To have a temperature close to the oil part Then gradually add the water Into the oil section While continuing to spin
Usage: For any recipe Acts as a water-in-oil emulsifier.
Mixing method: Mix in the oil.
Rate of use: 1.0-5.0%
Product characteristics: Yellow slurry
Solubility: Can dissolve in oil
Storage: Can be stored at room temperature Covered from sunlight, heat, the product is at least 2 years old.
INCI Name : A. Polyglyceryl-2 dipolyhydroxystearate
Be the first to review this product :-)
Recommend Lab-Service
Lab Service | Price |
---|
yellow water-in-oil emulsifier Commonly used in conjunction with Oil Blender In equal proportions (3%, 3% recommended) to create / coordinate a creamy texture. With a high content of oil (more than 40%) in the formulation
Polyglyceryl-2 dipolyhydroxystearate
The yellow water-in-oil emulsifier has a HLB value of approximately 5.0.
Commonly used in conjunction with Oil Blender In equal proportions (3%, 3% recommended) to create / coordinate a creamy texture. With a high content of oil (more than 40%) in the formulation
Example of Diaper Rash Protective Cream formula for children using Zinc Oxide to treat diaper rash.
Polyglyceryl-2 dipolyhydroxystearate 3%
Oil Blender 3%
Beeswax 1%
Shea Nut Oil 10%
Vitamin B5 3%
Water 50%
Heavy Mineral Oil Complete 100%
Steps to use Polyglyceryl-2 dipolyhydroxystearate in a coordinated water-in-oil cream formula:
Heat and mix the oil ( Polyglyceryl-2 dipolyhydroxystearate Must be mixed in the oil part), then warm the water part To have a temperature close to the oil part Then gradually add the water Into the oil section While continuing to spin
Usage: For any recipe Acts as a water-in-oil emulsifier.
Mixing method: Mix in the oil.
Rate of use: 1.0-5.0%
Product characteristics: Yellow slurry
Solubility: Can dissolve in oil
Storage: Can be stored at room temperature Covered from sunlight, heat, the product is at least 2 years old.
INCI Name : A. Polyglyceryl-2 dipolyhydroxystearate
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products