Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
coordinate Water - * Oil * - Silicone Freely Can be used as a blend to create a serum or cream texture.
coordinate Water - * Oil * - Silicone Freely Can be used as a blend to create a serum or cream texture.
Related Product Name | Description |
---|---|
SiliSolve Plus™ | Deodorized for premium formulation |
Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone | With general odor of emulsifier, for cost-sensitive formulation |
Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone Freely bind water to oil and silicone. Can be used as a blend to create a serum or cream texture.
The water ratio in the formula is in the range of 70-99% (meaning the proportion of silicone and all types of oil is 1-30%). Will make the formula thicker texture
Company Selling Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone 2 Grade
1. SiliSolve PlusTM Odorless grade Is a special grade The price is higher than the ordinary grade. But no smell Suitable for use in products applied on the surface of the lips.
2. Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone Light scent grade is ordinary grade, economical, light smell
Usage: It is a water-based binder with oil and silicone that can be used in all formulations.
Mixing method: Mix in the silicone well, then the water part of the water gradually add to the silicone part (if there is oil, mix the oil in the silicone part first, then mix the water together). on
Rate of use: 0.5-3% (higher consumption May cause the formula to become liquid)
Product characteristics: Clear liquid
Solubility: Can be dissolved in silicone
Storage: Can be stored at room temperature But close the bottle tightly And sealed from direct sunlight or heat, the product is at least 2 years old
INCI Name : Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
Certificate of Analysis/Specification Sheet will be sent to your mailbox after the order is packed.
Appearance:
Storage: Store under room temperature. Avoid Heat & Light.
Shelf Life: 24Months from manufacturing or testing date (Current Lot will expire: 03/2024)
Dosage (Range): 0.5% - 3%
Recommended Dosage: 1%
Research & Development: Japan
Mix Method: Mix in silicone phase. Heat tolerant.
Heat Resistance: Avoid heat above 80C
Product Specification:
Test | Specification |
---|---|
Appearance | Pale yellow liquid |
Viscosity 25C | 100-1000cSt |
Refractive Index 25C | 1.430-1.450 |
Specific Gravity 25C | 0.95-1.05 |