Oil Stick™ Hard (provides solid oil)Stick builder (hard texture) to oils and silicones, suitable for use in making lipstick. (used at a high rate of 3-4%), lip gloss (used at a low rate of not more than 1%), deodorant stick (used at a high rate of 3-4%) It can give clear texture. when used in conjunction with
Examples of clear lip formulas (using Oil Stick™ Hard with Oil Stick™ Medium for clarity)
1%
2%
20% (increases the pay-off of the lip texture so it stays on the whistles)
17%
___ % (applied at the desired color tone ratio)
The rest to complete 100% (gives the gloss of the lip texture)
Examples of Lip Gloss Formulations (Use a low level of Oil Stick™ Hard to give a gel-like texture)
5% (increases the pay-off of the lip texture so it stays on the whistles)
35% (moisturizes lips)
(Help dissolve/distribute color powder to stick on whistling)
melt at 85-95 degrees
Affecting the clarity of the oil This ratio depends on each type of oil.
If found that it is still not clear Increase or decrease the trial ratio. until it was found to be clearer
The difference between different types of Oil Gelling Agent / Oil Gellant
and
Certificate of Analysis/Specification Sheet will be sent to your mailbox after the order is packed.
Appearance:
Storage: Store under room temperature. Avoid Heat & Light.
Shelf Life: 120Months from manufacturing or testing date (Current Lot will expire: 03/2030)
Dosage (Range): 0.1% - 4%
Research & Development: Japan
Mix Method: Add into oil phase. Heat tolerant.
Heat Resistance: Heat Tolerant
Solubility: Oil
Product Types: Lip , Deodorant
INCI: Dibutyl Ethylhexanoyl Glutamide
Product Specification:
Test | Specification |
---|---|
Description | White to pale yellow powder |
Odor | Slightly characteristics odor |
Identification: IR Spectrophotometry | Passed Test |
Melting Point (C) | 183-196 |
Heavy Metals (Pb) | NMT 10ppm |
Arsenic (As2O3) | NMT 1ppm |
Water Content | NMT 0.5% |
Residue on Ignition | NMT 1.0% |
Content | 95-105% |