Vitamin B6 (Pyridoxine Hydrochloride)

Vitamin B6 (Pyridoxine Hydrochloride)

COSMETICS INGREDIENT

Vitamin B6 is effective in nourishing the skin in many ways. with a distinctive feature of oil control and tighten pores

Price 69.00 ฿ This special price only valid for web order

gram (mininum 5 gram)

Unit price will be cheaper for larger size
The price will be calculated based on the size you enter
>5,000g Discount 10% , >20,000g Discount 15%

Min100GCustom1KG



piece(s), Packing Cost : 10฿/pcs
The product will be packed based on the requested quantity



Expiration: 01/2025 (Lot: P458ZA)

Add to cart Favorite PDF

  • Info
  • Documents
  • Technical

Vitamin B6 is effective in nourishing the skin in many ways. with a distinctive feature of oil control and tighten pores

 

*The tightening of pores is caused by a mechanism that reduces skin oiliness. therefore yielding results Only on highly oily skin. If it is normal or dry skin, Vitamin B6 will not give any effect. To tighten pores*

 

In summary, the main functions of vitamin B6 are as follows:

- balance the oiliness of the skin by reducing it in areas that are too oily and increase moisture in dry areas

- Tighten pores For larger pores than usual from excess oil

- Reduce inflammation of the skin by inhibiting Interleukin 6 and Interleukin 8

   

Precautions for using Vitamin B6 in the formula

-Vitamin B6 has a low pH (between 2-3), which when used in formulas affects the pH of the formula, lowering the pH of the formula.

-Vitamin B6 will lose quality quickly. If heated or exposed to light in the mixing process Do not use heat above 40 degrees and try to avoid light.

-Vitamin B6 is stable only in the pH range 2-6, if the pH is higher, it will deteriorate.

-Vitamin B6 is an electrolyte, which may cause gelling. or cream, softening to create a gel or cream texture Increase the ratio of Cream Maker or Gel Maker to compensate for the softening of the formula.

 

Use: for any product to reduce the oiliness of the skin and tighten pores

Mixing method: mix in water (water-phase) by avoiding heat absolutely

Usage rate: 0.5-3.0%

Product characteristics: White powder **extremely afraid of light**

Solubility: can dissolve in water

Storage: For long term storage Store in a cool place, away from light, temperature 4-8 degrees, shelf life at least 4 years.

 

INCI Name : Pyridoxine Hydrochloride

Mechanism:

Appearance:

Storage: 5-15C, Tightly seal. Avoid Heat & Light

Shelf Life: 48Months from manufacturing or testing date (Current Lot will expire: 01/2025)

Dosage (Range): 0.5% - 3%

Mix Method: Add at last step. Avoid temperature above 40C.

Heat Resistance: Avoid heat above 40C

Stable in pH range: 2 - 6

Solubility: Water

Product Types: Cream , Lotion , Clear Gel , Toner , Mask , Scrub

INCI: Pyridoxine Hydrochloride

Product Specification:


Test Specification
Identifcation Positive
Appearance White to almost white crystalline powder
Assay (on dry basis) 99.0-101.0%
Loss on drying 0.2% Maximum
Residue on ignition 0.1% Maximum
Melting range 205-209 Degree Celsius
Solubility Completely soluble in water, slightly soluble in ethanol
Residual solvents Per specification
Related substances 0.025% Maximum
Organic volatile impurities Per specification
Melamine Negative
Chloride Content 16.9-17.6%
Total Heavy Metals 1ppm Maximum
Pb 0.5ppm Maximum
As 0.2ppm Maximum
Cd 0.1ppm Maximum
Hg 0.01ppm Maximum
Microbiological: Total Aerobic Plate Count 1000cfu/g Maximum
Microbiological: Yeast and Mold 100cfu/g Maximum
Microbiological: Coliforms Negative
Microbiological: E.Coli Negative
Microbiological: Salmonella Negative

Cart

No products

Shipping 0.00 ฿
Total 0.00 ฿

Warning

All ingredients are for manufacturing purpose. Do not use them directly. Finished product must be registered with FDA before selling to endusers

PrestaShop Modules

Our Facebook