Glycerin 99.5%
Glycerin (high purity 99.5%) is a humectant (retention and hygroscopicity), solvent and an emollient that helps make cosmetic products soft and smooth. Nice to use Used in almost all kinds of cosmetics.
Glycerin (high purity 99.5%) is a humectant (retention and hygroscopicity), solvent and an emollient that helps make cosmetic products soft and smooth. Nice to use Used in almost all kinds of cosmetics.
Glycerin (high purity 99.5%) is a humectant (retention and hygroscopicity), solvent and an emollient that helps make cosmetic products soft and smooth. Nice to use Used in almost all kinds of cosmetics.
Usage: Can be mixed in almost all kinds of cosmetics.
Mixing method: Mix in water (water-phase)
Rate of use: 1-100% (not suitable for direct skin application)
Product characteristics: Clear liquid with a liquid gel texture Ultra high purity
Solubility: Can dissolve in water
Storage: Can be stored at room temperature But close the bottle tightly And sealed from direct sunlight or heat, the product is at least 2 years old
INCI Name : A. Glycerin or Glycerol
Certificate of Analysis/Specification Sheet will be sent to your mailbox after the order is packed.
Mechanism:
Appearance:
Storage: Store under room temperature. Avoid Heat & Light.
Shelf Life: 24Months from manufacturing or testing date (Current Lot will expire: 04/2025)
Dosage (Range): 1% - 100%
Research & Development: Thailand
Mix Method: Add into water phase. Heat tolerant.
Heat Resistance: Avoid heat above 80C
Solubility: Dispersible in water , Dispersible in cream or gel base
Product Types: Cream , Lotion , Clear Gel , Toner , Mask , Scrub , Liquid Soap , Bar Soap (pH >7) , Bar Soap (pH <7) , Shampoo , Conditioner
INCI: Glycerin
Product Specification:
Test | Specification |
---|---|
Appearance | Clear, Colorless |
Glycerol Content (%wt) | 99.5 min |
Color (Hazen) | 10 max |
Specific Gravity (25C) | 1.2604 min |
Fatty Acid & Esters (ml, 0.5N NaOH) | 1.0 max |
Water Content (%wt) | 0.5 max |
Chloride (ppm) | 10 max |
Sulphate (ppm) | 20 max |
Residue on Ignition (%wt) | 0.01 max |
Limit of chlorinated compounds, (ppm) | 30 max |
Identification A (IR) | PASS |
Identification B (Diethylene Glycol and Ethylene Glycol) Diethylene Glycol, (%) | 0.1 max |
Identification B (Diethylene Glycol and Ethylene Glycol) Ethylene Glycol, (%) | 0.1 max |
Related Compounds (Organic impurity) Individual Impurity, (%) | 0.1 max |
Related Compounds (Organic impurity)Total Impurity, (%) | 1 max |
Heavy Metals (ppm) | 5 max |