Intends to make a serum for my 68-year-old mother. Wrinkles follow her age. Often exposed to the sun 3-4 days a week, but not dark or blemish. hope to have a bright face not darkened from the sun Slow down the occurrence of deep wrinkles and fade Serum 1.
น้ำกลั่น 86% 2.
Disodium EDTA 0.20% (exists) 3.
Pro Polymer Gel Maker 0.80% (existing) 4.
Ectoine 2% 5.
Tranexamic Acid 3% (existing) 6.
Ethyl Ascorbic acid (
Vitamin C Ethyl Ether ) 4% 7.
Mild Preserved Eco™ 1% ( already exists) 8.
Squalane (Olive) 2% (existing) 9.
Madecassoside -80 (
Centella Asiatica Extract ) 1% Mixing method 1.Take 1,2,3 blender or stir until it becomes a gel 2.Put 4,5,6,7 into it and stir until dissolved into the gel 3.Put 8 into the poor The gel turns white to opaque. 4. Put 9 into the last step. I'm not sure if it's a powder spread in a gel. or dissolved in water as the web page says Product characteristics: White, lightweight powder. Solubility: Dispersible in formulations. or dissolved in water It can be dissolved in water at a rate of not more than 1.0%w/v. If the formula contains 86% water, you must enter
Madecassoside -80 at 0.86%, right? If so, I will adjust the formula to only add 0.50% of the ingredients and method, right? Another sunscreen formula, not waterproof, can control oily face, covers UVA, UVB, and preferably PA++ or + more, you can stay indoors if you're only going to be in the sun for an hour in the afternoon, 3-4 times a week, can be used for both face and body. The skin is easily clogged. don't want white at all I want the cream to be packed in a thick squeeze tube like Hand cream PartA 1. Water 77.80% 2.
Disodium EDTA 0.20% PartB 3.
SPF Protect Ultra™ II 10% ( I wear only 10% because I usually reapply sunscreen every 2 hours, so I think that 15-20% is not necessary or if the information is wrong, please correct me) 4.
Milk Lotion Maker™ 4% 5.
Cetyl Alcohol (Vegetable) 4% (existing) PartC 6.
MatteSilica™ (Silica ดูดซับความมันผิว) 3% (existing) want to absorb it from the face as well. I want the formula not to be sticky. Blend into soft and smooth skin, if not at all
SPF Protect Ultra™ II Will the cream come out oily, sticky, harsh? I have never tried it without wearing it (usually I put 2% on my body and my face is not sticky. But when faced with it during the day I have to take a paper to blot the oil on my face, even if it disappears, this time I will try to increase it to 3%, hoping that it will control the oiliness on my face) 7.
Mild Preserved Eco™ 1% (existing) Mixing method 1. Reheat Part A and B. Temperature 70-80 degrees, let the oil dissolve homogeneously. 2. The process of mixing A and B, there is a question. -On the page of the sample sunscreen formula
SPF Protect Ultra™ II 15% 1.
SPF Protect Ultra II 15% 2.
Milk Lotion Maker 3% 3.
Satin Cream Maker 0.7% 4. Water 80.3% 5.
Mild Preserved Eco 1% Step: Mix 1+2 together by Heat to 70 degrees and blend or stir until homogeneous. It's part of the oil, heated 4 to 60-70 degrees, it's part of the water. churning part of the oil and while spinning Gradually add water to the oil. Blend for at least 15 minutes, add 3, blend until completely dissolved. The meat will thicken, then add 5 and blend well.
The oil part is to be blended first, then the water part is gradually added to the oil part and blended - Example ingredients and the procedure for using
Milk Lotion Maker™ Create Sunscreen Lotion 1.Water 59.5% 2.
SPF Protect Ultra 20% 3.
LipidSoft Dry 15% 4.
Milk Lotion Maker™ 4.5% 5.
Phenoxyethanol SA 1% Step A: Lead All parts of the oil are mixed together (2+3+4), heated to 70 degrees to melt. homogeneous will have a liquid form B: warm the water part (1+5) close to the oil part (70 degrees) C: while the water part is spinning with high speed Gradually add some of the oil. Continue blending together while it is cooling down. without using high speed
But for this recipe, blend the water and then add the oil. How is it different? Which one is better? what's the difference because never used
Milk Lotion Maker Usually Emulsifying Wax (E -Wax) (USA) 4%, combine water and oil with Cetyl Alcohol (Vegetable) 4% to help. thicken Tween20 1% When blending, the oil part is blended first and poured. The part of the water goes down to spin it to find the Myskin binder. which one is similar to the original one that is being used will be ordered to use 3. When blended until combined, put 6.
MatteSilica™ with 7 down. Continue to blend until the powder is evenly distributed into the cream.
Usually you would put MatteSilica™ ] MatteSilica™ mix into the shift. As for the water Warm it up and stir until the powder dissolves. Then slowly add it to the oil. But this time will change the way to put MatteSilica™ after blending into cream. Will the properties be different? Milk Lotion Maker How many percent do I have to put in to be a milky lotion?
Milk Lotion Maker if add 4% to
Cetyl Alcohol 4% Can it be used together to thicken the cream in a tube?