Browse Questions and Answers
Avg response: 24 HrsFilter Questions
20 of 14228 results
Please help me with 1000ml salmon DNA (PDRN) for its odor and stickiness? How much should I use of Odor Kill and Water Lube Slip? I’m making a stock solution.
I am looking for chemical ingredients to formulate a facial cleansing gel for sensitive skin with the following requirements: * **Process:** Cold process (no heat required) * **Requirement:** No heating involved Which ingredients should I use?
Hi, to make a Healing Wound Serum with your 2000ppm Colloidal Yellow solution test batch of total 25mls product, could I use the following: | Ingredient | Actual Grams | % | | :--- | :--- | :--- | | Distilled Water (NDA) | 23.3g | 92.00% | | Nano Colloidal Silver 2000pm solution (Water Soluble) | 0.5g | 2.00% | | Glycerine or Hyaluronic Acid | 1.3g | 5.00% | | Panthanol Vitamin 5 | 0.5g | 1% | | **Total** | | **25mls** | Or is adding Pananthol a waste of time and just stick to the other 3 ingredients? If not, what do you suggest? It is for home use, not for sale. Many thanks.
What substances can be used as a replacement for Cocamide DEA in cosmetic formulations?
Hello, I am inquiring about the optimal emulsifier-to-oil phase ratio for **Sucrose Palmitate (HLB 16)**. Specifically: * When formulating an emulsion, is it more effective as the primary emulsifier or as a co-emulsifier? * Additionally, if used as the main emulsifier, does it require a specific co-emulsifier for stability? * If so, which ingredient and percentage would you recommend? Thank you for your professional guidance!
I am using ColorFix ingredient in a hair mask formulation. * What is the full INCI ingredient list for ColorFix? * Does it contain any anionic surfactants or anionic polymers? I am combining it with cationic direct dyes and need to confirm compatibility.
Please let me know how many PPM are in **Nano-TXA™ (Tranexamic Acid Nano Emulsion, Penetration Base)**.
Mình có công thức sữa rửa mặt Aqua (p.s), Sodium Lauroyl Methylaminopropionate (7.0%), SCI (4.0%), DLS (4.0%), Lauryl Hydroxysultaine (4.0%), Coco-Glucoside (2.0%), Carbopol SF-1 (1.8%), Propylene Glycol (1.5%), Glycereth-26 (1.2%), Glycerin (1.0%), Betaine (1.0%), PEG-150 Distearate (1.0%), PEG-40 HCO (0.5%), Vitamin B5 (0.5%), Sodium Benzoate (0.5%), Chiết xuất vỏ cây liễu trắng (1%), PQ-39 (0.3%), Piroctone Olamine (0.2%), Chiết xuất lá trà xanh (0.3%), Chiết xuất ngải cứu (0.3%), Potassium Sorbate (0.2%), EDTA 2Na (0.1%), NaOH (p.s), Citric acid (p.s). Nhưng sau khi thực nghiệm mẫu mình nhận lại không phải gel trong như mong muốn mà kết quả bị đục. Sử dụng hơi bị khô da Nên tinh chỉnh và thực hiện quy tình khuấy như thế nào cho hợp lí Mình đã dùng NaOH để đẩy pH lên 6.5 cho SF1 trương nở (Lúc này gel trong). Cuối quy trình mình có dùng Citric hạ pH về 5.4 nhưng bị đục. Có phương án thay thế nào không?
Please review this acne-reducing facial wash gel formula for combination skin. **Ingredients:** 1. Cocamidopropyl Betaine 15% 2. N-Acetyl Cysteine (Glutathione synthesis) 5% 3. Allantoin 0.3% 4. Disodium EDTA 0.2% 5. Safe-B3™ (Vitamin B3, Niacinamide) 5% 6. Glycerin (USP/Food Grade) 5% 7. Xanthan Gum 0.5% 8. Mild Preserved Eco™ (Preservative-Free): 2% 9. Sodium Lactate (60% Liquid, Natural): 3% 10. WaterSil™ 8/12 (Water Gel Detackifier): 2% 11. Centella Asiatica Extract 2% 12. Tomato Extract 2% 13. Fragrance 0.5% 14. Di-Water: to 100% Can this formula be mixed? Are there any ingredients that should not be used? I am looking for a formula that is easy to rinse and not slippery, but doesn't leave the skin feeling dry or tight. Does this formula meet those requirements? Do I need to increase or decrease any ingredients? What should the final pH be? Also, please provide mixing instructions. Thank you.
Which Odor kill in liquid form is best to use with Salmon DNA serum formula and how much would you add to 30 ml serum?
Myristoyl hexapeptide-5 is unavailable. What are the recommended substitutes for use in cosmetics?
Which cooling agents would you recommend for a cooling spray that provides a long-lasting sensation without stinging the skin?
If using Melatonin Forte at 1% provides 0.1% Melatonin, but Pure Melatonin can be used up to 3%: * Why is the usage of Melatonin Forte limited to only 1%? * Why can't I use 10% Melatonin Forte to achieve a concentration equivalent to 1% Pure Melatonin?
Please provide the storage method and the appropriate temperature for products such as: * Sterile Defibrinated Sheep Blood * Sterile Anticoagulated Sheep Blood
Is Clarify-Wash™ Powder (Sodium C14-16 Olefin Sulfonate) suitable for direct use in a solid soap bar formulation without pre-dissolving in water? How can the solubilization issues mentioned—such as incomplete dispersion due to water amount, temperature, concentration, and mixing time—be addressed when no aqueous dissolution step is used?
Can I use isododecane gel to replace isododecane liquid, hydrogenated castor oil and Cera bellina? **Product Type:** Foundation balm/cream **Current Formulation:** * Isododecane: 38% * Hydrogenated castor oil: 7% * Cera bellina: 7% **Issue:** I'm finding it sets too quick to pour cleanly but gives a good texture on the skin.
Can this product (Fluid Extreme Sunscreen) resist water and sweat? Also, is it correct that I can use it immediately without adding any other ingredients?
Please help me with a formulation for a water-based gel serum using the following ingredients: * NanoTXA emulsion * Salmon DNA PDRN * Pep-R-Synthe-6 * Copper Peptide (Tripeptide-1) * Hyaluronic acid (Low MW and High MW) I have a 1% HA powder in water solution as a base. I would like to use 10% of each active ingredient for a 30 ml serum and EUXYL PE 9010 as a preservative.
Please help check this formula: **A** * Glycerin: 2.00% * Propanediol: 1.00% * Ceracare Liposome 3: 1.00% **B** * D.I. water: 40.00% * Vitamin B5: 1.00% * Disodium EDTA: 0.10% * ActiveProtec™ OX: 1.00% **C** * D.I. water: 20.00% * Sebum-Reg™ (Capryloyl Glycine): 1.00% **D** * Hyaluronic complex: 5.00% (mix various size, dry weight approx. 0.25% of formula) * Hydroalgae: 1.00% * Stock Hi-LiconeA (10%): 1.00% (Pre-made stock solution with Butylene glycol; calculate the amount needed to get Hi-LiconeA (10%) equivalent to 0.1-0.2% of the formula) * Prebio-care (Skin Prebiotic): 3.00% * Vitamin B3: 3.00% * ActiveProtec™ UV: 0.50% * Portulaca Extract: 0.50% * Allantoin: 0.20% **E** * Silk lotion maker: 1.00% * Sucrose maker: 2.00% * Hydrogenated Coco-Glycerides (34C): 1.00% * Protect OX: 0.05% * Protect UV: 0.05% **F** * Super fruit oil: 2.00% (Not from this supplier) * Rose hip oil: 2.00% * Squalane (natural): 1.00% * Vitamin E acetate: 0.50% **G** * Xanthan gum: 0.5% * My Preserv COS: 1.50% Add water to 100% and adjust pH to approximately 5-6.
Good day, Please I would like you to review these ingredients for stability for body and face cream, target for very dry and sensitive skin. Is there something I should remove or add to make it more moisturizing? **Ingredients:** * DW: 45.7% * EDTA: 0.1% * Allantoin: 0.5% * Aloe Vera juice: 10% * Colloidal oat: 1% * Glycerin: 5% * Xanthan gum: 0.2% * Coconut Oil: 5% * Shea butter: 3% * Jojoba oil: 5% * Olivem 1000: 4% * CCT: 2% * Squalane: 2% * Dimethicone: 3% * Cetyl alcohol: 1.5% * Glyceryl stearate SE: 1.5% * Cholesterol: 0.5% * Niacinamide: 4% * Chamomile extract: 1% * Sodium PCA: 1% * Ceramide influx: 3% * Moist72: 2% * Bisabolol WS: 0.3% * Hyaluronic acid HMW: 0.2% * Tocopheryl acetate: 0.5% * Euxyl 9010: 1% Thanks.
