Water-oil co-ordination emulsifier in the water-in-oil system is highly stable. At cool-hot temperatures

Polyglyceryl-4 Isostearate (and) Cetyl PEG / PPG-10/1 Dimethicone (and) Hexyl Laurate

Water-in-Oil Max ™ (eq. ABIL WE 09) water-in-oil co-ordination emulsifier is highly stable. At cool-hot temperatures

Instructions for use for a good stable water-in-oil emulsion.

1.Use Water-in-Oil MaxTM At the rate of 4-6% in conjunction with any type of wax At the rate of 1.5-3.0%, for example beeswax

2. Proportion of oil in the formula Should be in the range 19-35% (inclusive Water-in-Oil MaxTM in formulation)

3. In the process of harmonizing the formula. To warm the oil to the liquid. And keep spinning By gradually adding water Into the oil section By part of the water Could be at room temperature Or reheat Equal parts of the oil as well

4. Use the homogenizer head to blend the cream continuously. Or use a high speed The meat will be even more thick. Should not be over speed. 3000 rpm

5. The formula should always contain Magnesium Sulfate 1% (dissolved in water) to help reduce surface tension. And enhances the stability of the formula

Water-in-oil emulsion description

Usually, skin care creams or gels are made from an oil-in-water emulsion or encapsulation of the oil with water.

The left picture is oil-in-water emulsion, the right picture is water-in-oil emulsion.

The highlight of the oil-in-water emulsion, which is used as a cream or gel in the skin, is more than 95% of all products, it is non-greasy, easily absorbed by the skin. Does not coat the skin well. Due to the nature of the product is coated with water When applied to the skin It gives a feeling that water is applied to the surface. It is also not waterproof. Since the formula is coated with water, it will be rinsed off immediately. It is also not suitable for make-up formulas such as BB Cream as it cannot spread powder and foundation evenly on the skin. This is because the pigment is usually oil-soluble. When present in an oil-in-water base, it does not spread well both in formulas and on the skin.

The advantage of water-in-oil emulsion is that it can be a good coating. Ideal for dry, severely dehydrated skin and needs a coating so that it doesn't lose water easily. They are ideal for use as a night cream, night serum, or as a moisturizer in dry weather, cool weather or in air-conditioned rooms. The key feature of this water-in-oil is its waterproof ability. And durability on the skin Because the formula is coated with oil Therefore it is durable and stays on the skin for a long time And can be waterproof It is ideal for both make-up and sunscreen formulas. Which requires durability And cover (spread easily and evenly) on the skin

More instructions for use:

- The thickening of the recipe depends on the amount of water in the recipe, if there is a lot of water, the thicker the formula will be.

Difference between Water-in-Oil EZTM And Water-CapsuleTM

Either Water-CapsuleTM And Water-in-Oil EZTM It is used to create a cream or serum formula that has the same water-in-oil properties, but with the following differences:

- Water-in-Oil EZTM Good workability in electrolyte formulations. Without any effect Examples of substances with high electrolyte are: DMAE , Sodium Lactate While other binders include Water-CapsuleTM Unable to form meat Or must be used in very high quantities

- Water-in-Oil EZTM Can support oil, silicone up to 35%, but Water-CapsuleTM It can support up to 20% of the oil if the formula focuses on the use of silicone or has a high oil content. Please choose to use Water-in-Oil EZTM

- Water-CapsuleTM The formula can be easily thickened with a stronger / longer blend Will get a thicker texture, but in adjusting the thickness of Water-in-Oil EZTM Must have to adjust the mixture rate or use Gel Maker / Thickener

Usage: It is a water-based binder with oil and silicone that can be used in all formulations.

Mixing method: Please study the instructions above.

Rate of use: 4-6% (5% recommended for most recipes)

Product characteristics: Clear liquid with a slight consistency

Solubility: Can dissolve in oil

Storage: Can be stored at room temperature But close the bottle tightly And sealed from direct sunlight or heat, the product is at least 2 years old

INCI Name : A. Polyglyceryl-4 Isostearate (and) Cetyl PEG / PPG-10/1 Dimethicone (and) Hexyl Laurate

Examples of products used Polyglyceryl-4 Isostearate (and) Cetyl PEG / PPG-10/1 Dimethicone (and) Hexyl Laurate in formulation

CLINIQUE Superbalanced Makeup

Cerave Therapeutic Hand Cream

Estee Lauder Perfectionist Youth-Infusing Serum Makeup SPF 25 (USA)

Vichy Laboratoires Dermablend 16h

LA ROCHE-POSAY TOLERIANE CORRECTIVE LIQUID FOUNDATION

CLINIQUE Pep-start pout perfecting balm.

CLINIQUE Repairwear Intensive Lip Treatment

Estee Lauder Double Wear Light Soft Matte Hydra Makeup

Estee Lauder Perfectionist youth infusing serum foundation

Estee Lauder Perfectionist foundation

Vichy Dermablend Fluid Corrective Foundation