acid Glycolic Powder Minimum purity 99% from nature, extracted from sugarcane for accelerating skin cell turnover (chemical peel / exfoliation)

vanilla extract gives a warm feeling to the skin And stimulate the circulation of blood vessels after 5 minutes of application and continuously for up to 1-2 hours with high safety. Suitable for use in fat burning formulas.

Soluble in oil or glycol or alcohol

Caustic Soda is used to adjust the pH of cosmetic formulations to have a higher pH.

PHA (PHA) from corn for exfoliation With a molecule larger than the AHA group, making it less irritating like AHA (such as Glycolic Acid, Lactic Acid)

100% natural preservatives that can control all types of germs. (broad-spectrum) suitable for use in powder or dry products due to its powder appearance.

Surfactant Special kind Used as the main detergent In formulas that require gentle such as baby shampoo, baby soap, facial cleanser And used as a secondary detergent In formulas that require a high amount of foam or lather

Fine powder (super fine powder), Anionic (Anion), Isethionates

An oil binder in shampoos, liquid soaps and cleansers and creates a thick viscosity. By giving the texture of shampoo, liquid soap or cleanser, beautiful clear color and high viscosity in case of need.

type: Gives a very clear texture (very clear texture)

Dimethicone, a special type, has a similar light texture. Cyclomethicone is non-volatile and odour-free. Suitable for use in formulas that require lightness like Cyclomethicone But you don't want it to evaporate. To keep the skin soft and smooth for a long time.

Low thickness (50cSt)

Emollient (softener) without oil It has a lighter texture than normal LipidSoft™, suitable for use in formulas that require the most lightness, such as CC Cream for oily skin.

Solder water-silicone freely. Can be used to coordinate to create serum or cream texture.

HLB about 4.5

Emollient (softening agent) that does not contain oil. It is a polar ester that can dissolve paints and ingredients well. Caused by a reaction between Benzoic Acid and Coconut Oil.

Popularly called the trade names Finsolve TN or Cetiol AB.

Wax or wax obtained from the candelilla plant. It is a wax that is in a solid state. It is yellow-brown. slightly translucent

For use in encapsulating ingredients for better solubility to increase bioavailability For ingredients that are difficult to dissolve Including increasing the stability of some ingredients that have low stability.

Ultra-lightweight Emollient Can quickly evaporate from the skin. Makes it not leave a sticky residue on the skin. and is soluble in silicones, hydrocarbons, isoparaffin without soluble in water. Suitable for use in place of oil in oil-free formulas that require extra lightness.

Silicone gel, special clear texture, for use as a gel base. In products that do not require the use of water (Anhydrous) , for increasing spreadability in every type of product Adjust the texture of the product to have a soft, smooth and light texture, not sticky. Make the skin look not oily (matt look)

Provides the highest softness and the most silky texture compared to other types of silicone gel.

Suitable for liquid foundation, BB, CC, Cushion formulas that want to blur the skin. Adjust the texture to make it very easy to spread. and light on the skin

cations in water Prevent ions in water (in the case of non-distilled water) from interfering with components in some products that are sensitive to charge. as well as helping the formula to be stable can be stored longer

Surfactants/detergents   Non-ionic type From nature, extra gentle, suitable for use in shampoos, soaps or facial cleansers that require special gentleness. For sensitive skin

non-ionic type , Group: Alkyl polyglycoside

group:   Gentle skin cleanser / unable to create foam.

It has a heavier texture. Cyclomethicone and non-volatile, suitable for use in cosmetics that require a smooth skin feel when used (slip). Can be used with both skin care and hair care products. It will stick to the skin or hair to give a special slippery feeling. Low-Odor has been processed to reduce odor.

Medium thickness (350cSt), Grade: Japan, extra silky touch, no-odor

Light silicone Can evaporate quickly Suitable for use in cosmetics to help bring active substances into the skin. It has a special feature that is not sticky. And it feels silky soft when used on skin or hair.

Often referred to as DC-345, TSF-405.

Grade: Japan, extra silky touch, no-odor

Surfactants Used to mix in shampoo or soap to make laundry detergent. clean hair or the skin is tender Does not cause irritation like Sulfate family substances such as SLS, SLeS.

Amphoteric Type , Group: Betaine

Category: Secondary detergent, acts to create foam/conditioning the skin and hair.

Phenoxyethanol It is a highly safe preservative, free of Paraben and Formaldehyde, which are carcinogenic substances.

Extra Pure, a special type, reduces the risk of skin irritation. arising from Ordinary type Phenoxyethanol with a phenol value lower than 5ppm (ordinary type will have a value not exceeding 10-20ppm, which may cause irritation to sensitive users).

hydrocarbon derived from petroleum and is commonly used in cosmetics and personal care products

a silicone crosspolymer that is designed to give jelly texture on the semi-solid formulation such as eye shadow

used in shampoos, bubble baths, handsoaps and conditioners for its conditioning, foam stablizing and viscosity building properties

Detergents that focus on creating lather or foam in the formula. caused by the chemical process between Coconut oil and dimethylaminopropylamine

Type: Amphoteric, Group: Hydroxysultaine

Category: Secondary Detergents It acts as a foam/conditioning of skin and hair.

a copolymer of methyl vinyl ether and maleic anhydride. It is a water-insoluble white powder that can be easily dispersed in water where the polymeric anhydride hydrolyzes to produce a transparent solution of the free acid

Detergent/detergent high efficiency both in terms of cleaning and foaming. Suitable for use in clarifying shampoo formulas. , Liquid soap for athletes / those who sweat a lot.

Anionic type (anionic), group: Sulfonate (cleans well)

Category: Primary Surfactant

esters obtained from nature Make your skin soft and smooth. Suitable for products that want to emphasize their naturalness.

sugarcane extract which is effective in suppressing all types of odors Can be used on all parts of the body.

Can be added to the formula both before spinning To reduce the formation of foam after blending or add it to the formula after blending which has already formed foam. Then continue to stir The bubbles will disappear from the formula on their own.

In the form of powder

highly efficient hair conditioner It is commonly used in products that require effective hair softening.

Microcrystalline Wax Refined Type Pure White and no smell Used to adjust the viscosity of the oil. Suitable for all makeup formulations. Helps increase color uniformity and prevent segregation (sweating) of lipstick.

Melting Point 73C, very soft texture.

Silicone Polymer with a thickness range of 3,000-10,000 cps is commonly used in skin care products or surfaces that require a coating to adhere. to make it soft and smooth and reduce static electricity (anti-static)

high-concentration type ( 3,000-10,000 cps)

Acts as Foam Texturizer, making foam bubbles soft when touched on the skin. It is commonly used in skin or hair cleansing formulas to create a soft touch on the skin.

Dimethiconol 15-17% in Isohexadecane base of which Dimethiconol is silicone gum, high viscosity, high adhesion Makes it able to stick on the hair or skin firmly, making the skin or hair soft and smooth (conditioning)

Phenyl silicone has a silky texture and not volatile, odour-free, high shine. Suitable for use in formulas that require the shine of the entire formula. and shine when applied to the skin or on the hair

Silicone film helps coat all types of make-up, long-lasting, and waterproof.

Powder type, medium viscosity, extremely long lasting. Suitable for use in lip products, not suitable for use in foundation products as it may cause skin discomfort.

Wax or wax obtained from the candelilla plant. It is a wax that is in a solid state. It is yellow-brown. slightly translucent

Melting Point 72.5C (Range: 70-75C)

Hydrogenated Polyisobutene (4cs) clear and light hydrocarbon oil.