A substance that creates a gel texture for oils. For use in makeup formulas or any type of cosmetics that is mainly composed of oil Has a high ability to hold (suspension) pigments, pearl powder and various sparkling powders in the formula. without settling and allows the color to be completely distributed.

Base: Dicaprylyl Carbonate

Mulse Cream Maker (Polyglyceryl-3 Methylglucose Distearate) is an oil-in-water that is plant sourced and PEG-free.

Solder water-*oil*-silicone Can be used together to create a serum or cream texture.

HLB 3.0 approx.

Sorbitan Laurate, commonly known as Span 20, is used as a water-in-oil emulsifier.

HLB is approximately 8.6.

Use as a water-in-oil emulsifier in various make-up recipes.

HLB is approximately 5.5.

It is developed as an emulsion stabilizer or an aid to enhance the stability of any emulsion with a mechanism different from other types of emulsion stabilizers.

Glyceryl Stearate and PEG-100 Stearate are emulsifiers commonly used in a variety of products. Due to the inexpensive price, it has an HLB value of approximately 11.0.

Type: Sand-like powder

Characteristic gel-building substance It absorbs a large amount of water like a sponge and releases the water into the skin when applied on the skin. To feel refreshed on the skin immediately

Emulsifier that is commonly used in underarm products Because it has special characteristics, can withstand electrolyte well and has a good surface that is not sticky.

It is one of the thickeners in the Polysaccharides group. It has a special film-forming effect that creates a thin film on the surface. Suitable for a wide range of products

Viscosity: 18-100 mm2/s (10%, 30C)

Polymethylsilsesquioxane in liquid form provides an easy and instant blurring effect. which can be mixed with any formula And also gives the skin a good touch, soft, smooth and not greasy.

Helps create a texture (texturizer) that gives it a viscous consistency. with any formula that contains oil as an ingredient Gives a good texture to the skin. Popularly used in place of Wax or Fatty Alcohol (such as Cetearyl Alcohol, Cetyl Alcohol, Stearyl Alcohol) of any kind because it gives a better texture. And does not cause whiteness on the skin when applied.

give texture thixotropic or a liquid gel When a force acts, such as stirring or squeezing meat when applied on the skin so it can be spread easily Not as viscous as when in the package, giving a clear texture when used with non-polar oil. and some types of polar oils

Creamy emulsifier, water-in-oil type (water wrapped in oil), easy to use. No heat required And use just a little bit of oil to cover the water. Makes the skin not sticky But it has good properties of water-in-oil cream, such as coating the skin well. Waterproof and disperses pigments well. Suitable for long-lasting night cream, BB cream, make-up, sunscreen formulas. and covers the skin well

Sugar ester powder from nature (all natural, all biodegradable) serves to create an oil gel. By giving a clear, translucent gel texture, it can be used to create an oily gel texture. The gel cleanser (make-up cleanser gel) can combine the water in the formula with the oil. in small quantities

Provides skin blur at 31%, light transmission 92%, absorbs skin oil. (not oil in the formula) 100%, absorbs silicone in the formula 200%

The powder particles are approximately 5 micron in size.

Manufactured to be equivalent to KSP-100 (not manufactured by the manufacturer of KSP-100)

HPMC Create gel texture Without the effect of electrolyte, it is suitable for formulation of gels with special electrolyte characteristics. in helping create bubbles in skin cleansing formula

Provides a viscosity of 3,500-5,600 mPa s (cPs) at 2% in water.

Gelling Temperature: 68C

Xanthan gum is a thickener that can be used in almost every environment. Produced 100% naturally by fermentation of sugar, sucrose or glucose, with bacteria Xanthomonas campestris.

Clear gel type / non-stretchy texture

Emulsifiers and thickeners that do not require heat Can be used in a pH range of 2.5-11 and can contain up to 20% oil. Easy to use, just mix in the oil-phase in case of oil-phase, or can mix in water-phase without oil-phase ( which will act as a thickener)