HPMC  Create gel texture Without the effect of electrolyte, it is suitable for formulation of gels with special electrolyte characteristics. in helping create bubbles in skin cleansing formula

ColdMix™ type is soluble in cold water. do not need to be warm Please read the details of how to use.

provide the viscosity 10,000-16,500 mPa s (cPs) at 2% in water 

A semi-solid gel-forming agent that can give a clear gel texture. for water formula and can cement oil about 15-20%

Polyglyceryl-2 Oleate used as water-in-oil An emulsifier with an HLB value of approximately 5.5-6.5.

PEG-free, non-ionic, water-in-oil and natural-derived emulsifier. (Not directly from nature But using natural ingredients Came through a chemical process)

ECOCERT-CERTIFIED

It is considered one of the emulsifiers derived from nature (sodium salt of lactic acid + stearic acid). It has a distinctive feature that is different from the general emulsifier is that it can moisturize the skin well. Can be easily absorbed into the skin.

HLB 8.3 approx.

Polyglyceryl-10 Oleate Used as an emulsifier with an HLB value of approximately 12.5.

Helps build meat Provides viscosity with any formula that has oil as an ingredient The formula is rich and coats the skin well (emolliency). It is commonly used in skin care creams, lipsticks, hair conditioners, and deodorant products.

polyethylene glycol ether / lauryl alcohol emulsifier

Xanthan gum is a thickener that can be used in almost every environment. Produced 100% naturally by the fermentation of sugar, sucrose or glucose, with the bacteria Xanthomonas campestris.

Clear gel type / normal texture (not suitable for use to create a single gel texture)

Ultra-fine 200 mesh powder

commonly used in formulas Clean the skin or wipe off makeup.

milk soap making agent The soap is composed of all oils (100%) and added Oil Milk™ It cleans the skin about 10-40%.

Base serum, soft and smooth, absorbs quickly. Can coordinate oils in the formula When spread evenly on the skin, it can be absorbed into the skin immediately within seconds. Can be mixed with water (and ingredients dissolved in water) in a ratio of 30-90% and oil in a ratio not exceeding 30%. and will immediately become a serum ( please study the mixing method in detail below )

White Micro Silk BB cream, size not more than 12 microns, processed into a spherical shape. To be able to hide wrinkles on the face And pores more perfectly than conventional BB powders such as Silica, and gives a silk-like smoothness.

Surfactant Cleaning agent From coconut oil The non-ionic type has special characteristics. With high gentleness Suitable for use in facial cleanser formulations. Baby shampoo formula, baby soap or for skin that is sensitive and feels soft and smooth Along with nourishing and moisturizing the skin

For wiping / removing makeup

Natural guar gum has been processed to have a positive charge (cationic) to make it suitable for mixing in shampoo with conditioning properties (for conditioning shampoo) or suitable for mixing in hair conditioner.

Viscosity: 1,000-5,000mPas, Avg. 3500

Sunscreen serum, light texture, no residue, high sun protection efficiency, inexpensive. This product was developed to test the efficiency of AquaForce™ BEMT 5%, AquaForce™ EHT 5% and AquaForce™ DMTS 5%.

Highly fluid / non-sticky / light on skin / SPF 149, UVAPF 73 - Ready to test and measure everywhere

Made possible with AquaForce™ series of sunscreen agents.

It has been adjusted to be more suitable for combination or oily acne-prone skin, without leaving a slippery feeling on the skin after washing.

Developed to be similar to Plantasil LA, with the advantage of having a lower pH (LA-Gel's pH is in the range of 9-11 to avoid skin irritation).

Used to adjust the texture of the product to have a smooth texture. Can help act as a foam booster to help smooth the skin.

The highlight is that it can be dispersed well in glycol or in formulas with little water. Suitable for creating gels in formulas with low water content, with glycol or other solvents that are not water. It is the main component of the formula.

Hair removal cream base, light scent, gentle on the skin. Provides high efficiency

PEG-6 Stearate is an oil-in-water emulsifier commonly used in various types of creams and lotions. 

HLB 9-10 approx.

Poloxamers, also known as Pluronics, are a family of non-ionic block copolymers with unique properties for use in cosmetic and pharmaceutical applications.

Gelation Temp about 40-42C (cold = liquid, hot = thick)

have hair styling Emphasis on naturalness to feel 100% Natural Look, not stiff

Isononyl Isononanoate Oil Gel Oil gel is suitable as a base for a variety of formulas, for example Make-up, Oil Gel, Massage Gel, Lip Balm or skin care.

Peel-Off Mask Base, ready-made mask powder (white, thick)

When using, mix with water. 1 part powder: 1.5 parts water

Slow setting type (about 7-9 minutes)

Extracted from Soybean with the purity of Phospholipids above 95%

dispersible in water, HLB value of 9 (approx.)

Sodium Alginate Used as a thickener, gelling agent in food. Made from seaweed, a seaweed.

high HLB emulsifier commonly used as a solvent (solubilizer) in the formula that needs naturalness because Heptyl Glucoside is obtained from nature (sugar + castor oil)

Permanent hair dye

Mix this color base with the developer in a container (not metal), mix ratio 1: 1.5

Silica powder undergoes a special process to make it spherical, smaller (average size 9-11 microns) and porous surface to help absorb oil better than conventional types. For adjusting gel or powder texture to slip and help absorb excess oil on the skin.

Powder size 9-11 microns, high smoothness but not good on the surface

Color for hair color products, semi-permanent type (semi-permanent) or popularly known as color refreshing shampoo, suitable for colored hair. and when the color fades You can use this base and leave it for 5-10 minutes to get a new color.

A substance that creates a gel texture for oils. For use in makeup formulas or any type of cosmetics that is mainly composed of oil Has a high ability to hold (suspension) pigments, pearl powder and various sparkling powders in the formula. without settling and allows the color to be completely distributed.

Base: Dicaprylyl Carbonate

Mulse Cream Maker (Polyglyceryl-3 Methylglucose Distearate) is an oil-in-water that is plant sourced and PEG-free.

Solder water-*oil*-silicone Can be used together to create a serum or cream texture.

HLB 3.0 approx.