Extracted from Soybean with the purity of Phospholipids above 95%

dispersible in water, HLB value of 9 (approx.)

Sodium Alginate Used as a thickener, gelling agent in food. Made from seaweed, a seaweed.

high HLB emulsifier commonly used as a solvent (solubilizer) in the formula that needs naturalness because Heptyl Glucoside is obtained from nature (sugar + castor oil)

Permanent hair dye

Mix this color base with the developer in a container (not metal), mix ratio 1: 1.5

Silica powder undergoes a special process to make it spherical, smaller (average size 9-11 microns) and porous surface to help absorb oil better than conventional types. For adjusting gel or powder texture to slip and help absorb excess oil on the skin.

Powder size 9-11 microns, high smoothness but not good on the surface

Water-based nail polish, free of acetone, alcohol and volatile substances, gentle on nails and fingers.

This item is colorless. When dry, it will become a translucent, shiny film for mixing with other colors. To get the desired color, you can add glitter.

Color for hair color products, semi-permanent type (semi-permanent) or popularly known as color refreshing shampoo, suitable for colored hair. and when the color fades You can use this base and leave it for 5-10 minutes to get a new color.

Lip gloss, film type, long lasting on the lips. It can stay on the lips for about 6 hours. It can withstand drinking water (hot/cold) and still gives shine and fresh color all the time.

A substance that creates a gel texture for oils. For use in makeup formulas or any type of cosmetics that is mainly composed of oil Has a high ability to hold (suspension) pigments, pearl powder and various sparkling powders in the formula. without settling and allows the color to be completely distributed.

Base: Dicaprylyl Carbonate

Mulse Cream Maker (Polyglyceryl-3 Methylglucose Distearate) is an oil-in-water that is plant sourced and PEG-free.

Solder water-*oil*-silicone Can be used together to create a serum or cream texture.

HLB 3.0 approx.

Sorbitan Laurate, commonly known as Span 20, is used as a water-in-oil emulsifier.

HLB is approximately 8.6.

Use as a water-in-oil emulsifier in various make-up recipes.

HLB is approximately 5.5.

It is developed as an emulsion stabilizer or an aid to enhance the stability of any emulsion with a mechanism different from other types of emulsion stabilizers.

Glyceryl Stearate and PEG-100 Stearate are emulsifiers commonly used in a variety of products. Due to the inexpensive price, it has an HLB value of approximately 11.0.

Type: Sand-like powder

Characteristic gel-building substance It absorbs a large amount of water like a sponge and releases the water into the skin when applied on the skin. To feel refreshed on the skin immediately

Emulsifier that is commonly used in underarm products Because it has special characteristics, can withstand electrolyte well and has a good surface that is not sticky.

It is one of the thickeners in the Polysaccharides group. It has a special film-forming effect that creates a thin film on the surface. Suitable for a wide range of products

Viscosity: 18-100 mm2/s (10%, 30C)

Polymethylsilsesquioxane in liquid form provides an easy and instant blurring effect. which can be mixed with any formula And also gives the skin a good touch, soft, smooth and not greasy.

Helps create a texture (texturizer) that gives it a viscous consistency. with any formula that contains oil as an ingredient Gives a good texture to the skin. Popularly used in place of Wax or Fatty Alcohol (such as Cetearyl Alcohol, Cetyl Alcohol, Stearyl Alcohol) of any kind because it gives a better texture. And does not cause whiteness on the skin when applied.

Creamy emulsifier, water-in-oil type (water wrapped in oil), easy to use. No heat required And use just a little bit of oil to cover the water. Makes the skin not sticky But it has good properties of water-in-oil cream, such as coating the skin well. Waterproof and disperses pigments well. Suitable for long-lasting night cream, BB cream, make-up, sunscreen formulas. and covers the skin well

Sugar ester powder from nature (all natural, all biodegradable) serves to create an oil gel. By giving a clear, translucent gel texture, it can be used to create an oily gel texture. The gel cleanser (make-up cleanser gel) can combine the water in the formula with the oil. in small quantities

Provides skin blur at 31%, light transmission 92%, absorbs skin oil. (not oil in the formula) 100%, absorbs silicone in the formula 200%

The powder particles are approximately 5 micron in size.

Manufactured to be equivalent to KSP-100 (not manufactured by the manufacturer of KSP-100)

HPMC Create gel texture Without the effect of electrolyte, it is suitable for formulation of gels with special electrolyte characteristics. in helping create bubbles in skin cleansing formula

Provides a viscosity of 3,500-5,600 mPa s (cPs) at 2% in water.

Gelling Temperature: 68C

Xanthan gum is a thickener that can be used in almost every environment. Produced 100% naturally by fermentation of sugar, sucrose or glucose, with bacteria Xanthomonas campestris.

Clear gel type / non-stretchy texture

Emulsifiers and thickeners that do not require heat Can be used in a pH range of 2.5-11 and can contain up to 20% oil. Easy to use, just mix in the oil-phase in case of oil-phase, or can mix in water-phase without oil-phase ( which will act as a thickener)

Developed to be similar to Maybelline's Sky High product.

One of the cleansers for people with acne problems is popular because it is gentle and helps solve acne problems well.

This product is a finished base - ready to use. It can be mixed with other colors.

Can withstand high alkalis and can withstand high oxidation, therefore suitable for home care formulas such as floor cleaners.

For use on the skin after showering to make the skin white. It can stick to the skin well. Lasts on the skin all day.

Sodium Alginate Used as a thickener, gelling agent in food. Made from seaweed, a seaweed.   

Cushion developed to have characteristics similar to Jeongsammun's products

V2 has been improved from the original formula. To make it more similar

With FoundationFix ™ 15% helps smooth out wrinkles on the face. Tightens the skin immediately after putting on makeup.

Hair styling powder, adding volume, styling hair to look natural. Can be styled repeatedly.

When the water is dissolved, leave it to cool. will set itself into a gel mask texture and gradually release the ingredients in the mask into the skin

Make the mask clear like glass using at a rate of only 1%

Water-based nail polish, free of acetone, alcohol and volatile substances, gentle on nails and fingers.

This color is a primary color that can be mixed with other colors. To get the desired color, you can add glitter.

Dicaprylyl Carbonate Gel Oil Gel Suitable as a base for a variety of formulas, for example Make-up, Oil Gel, Massage Gel, Lip Balm or skin care.

 It has a high ability to hold (suspension) pigments, pearl powders and various sparkling powders in the formula. without precipitation and make the color spread completely  

Polyglyceryl-10 Caprylate is used as an oil-in-water emulsifier with a HLB value of approximately 16-17.

Permanent hair dye

Mix this color base with the developer in a container (not metal), mix ratio 1: 1.5

Color for hair color products, semi-permanent type (semi-permanent) or popularly known as color refreshing shampoo, suitable for colored hair. and when the color fades You can use this base and leave it for 5-10 minutes to get a new color.

Lip gloss, film type, long lasting on the lips. It can stay on the lips for about 6 hours. It can withstand drinking water (hot/cold) and still gives shine and fresh color all the time.

(Primary colors are used for mixing colors to adjust colors, not finished colors)

Create a clear oily gel texture. Hard texture type, easy to use, high density Can be used in all types of oils

film forming agent The highlight is Gives a soft, fast-drying, moderately durable film, therefore it is commonly used in products that do not require high durability. but provides skin comfort soft film make it feel natural not hardened

Highly efficient water-in-oil emulsifier It is produced by mixing two types of emulsifiers to form a highly stable water-in-oil emulsion.

commonly used act as Cleaning agent/makeup remover (cleanser) which is more gentle than the PEG group.

Approximately HLB 8

Sorbitan Palmitate, popularly known by the trade name Span 20, is used as a water-in-oil emulsifier.

HLB is approximately 6.7.

PMMA (Poly(methyl methacrylate)designed to be highly transparent give the skin a good touch can cut light well

Gel-forming agent used to create gel texture in organic solvents, such as creating gel texture in alcohol gel

Viscosity at 20C 1% 7000-9000 mPa.s.