UV-VIS Anti-Hyaluronidase Assay

  • Product Code: 31936
Spectrophotometric assay for inhibitory activity of skin extracts against porcine pancreatic elastase using N-succinyl-Ala-Ala-Ala-p-nitroanilide substrate, measured at 410 nm.
฿2,990.00

label ชื่อตัวอย่าง

info Please enter each sample name you want included for testing

assignment คำแนะนำ

info โปรดระบุข้อกำหนดหรือเงื่อนไขเฉพาะสำหรับการทดสอบ

description Sample Requirement

skin tissue · 1 · g

insert_drive_file Report of Previously Tested Sample

Select a tab and click View to open the report.

timeline ขั้นตอนการให้บริการ

ขั้นตอน ขั้นตอน ผลลัพธ์ที่คาดหวัง
1

Weigh 10...
check_circle_outline

Homogenized suspension.
2

Add 160...
check_circle_outline

buffer
3

Add 20...
check_circle_outline

test

4

Add 20...
check_circle_outline

test sample with enzyme mixture
5

Add 20...
check_circle_outline

test sample, enzyme and substrate mixture
6

Incubate at...
check_circle_outline

enzyme-substrate reaction
7

Absorbance is...
check_circle_outline

absorbance of reaction
8

Each measurement...
check_circle_outline

ensure test protocol
9

The percentage...
check_circle_outline

% inhibition

UV-VIS Anti-Hyaluronidase Assay

UV-VIS Anti-Hyaluronidase Assay

UV-VIS Anti-Hyaluronidase Assay

 

Materials and Reagents:

Hyaluronidase enzyme
Hyaluronic acid substrate (sodium hyaluronate)
Inhibitor (substance being tested)
Appropriate buffer solution (e.g., phosphate buffer, pH 5-6)
Deionized water


Procedure:

Prepare a Blank Solution:

Use a UV-grade quartz cuvette and fill it with the buffer solution. This will serve as your blank reference for baseline correction.

 

Calibrate the Spectrophotometer:

Turn on the UV-Vis spectrophotometer and allow it to warm up.
Set the wavelength to the appropriate value for monitoring the reaction. The wavelength may vary depending on the specific assay, but it's commonly around 400 nm.
Adjust the spectrophotometer's baseline using the blank solution, so that it reads zero absorbance at the chosen wavelength.

 

Prepare the Reaction Mixture:

In a microcentrifuge tube, mix a known volume of hyaluronidase enzyme solution with a known volume of the hyaluronic acid substrate solution. The enzyme concentration and substrate concentration should be consistent between experiments.
If you are testing the inhibitory effect of a substance, add the inhibitor to this reaction mixture at an appropriate concentration. Ensure that you have a control reaction mixture without the inhibitor for comparison.

 

Incubate the Reaction Mixture:

Incubate the reaction mixture at an appropriate temperature (typically around 37°C) for a specific amount of time. The incubation time may vary depending on the enzyme kinetics and the specific assay conditions.

 

Measure the Absorbance:

After the incubation period, take a small volume (usually 1 mL) of the reaction mixture and place it in a quartz cuvette.
Wipe the cuvette with a lint-free tissue to remove any fingerprints or smudges.
Place the cuvette in the spectrophotometer and record the absorbance at the chosen wavelength.

 

Calculate the Inhibition Percentage:

Compare the absorbance of the sample with the inhibitor to the control sample without the inhibitor.

Mechanism -
Appearance -
Longevity -
Strength -
Storage -
Shelf Life -
Allergen(s) -
Dosage (Range) -
Recommended Dosage -
Dosage (Per Day) -
Recommended Dosage (Per Day) -
Mix Method -
Heat Resistance -
Stable in pH range -
Solubility -
Product Types -
INCI -
Service Steps
Step Procedure Expected Result
1

Weigh 10...

Homogenized suspension.
2

Add 160...

buffer
3

Add 20...

test

4

Add 20...

test sample with enzyme mixture
5

Add 20...

test sample, enzyme and substrate mixture
6

Incubate at...

enzyme-substrate reaction
7

Absorbance is...

absorbance of reaction
8

Each measurement...

ensure test protocol
9

The percentage...

% inhibition