Oil Soap (Oil Soap) for dry, sensitive skin provides oil soap with a clear texture. and have normal bubble level without the need for water in the formula and can adjust the pH to 5.5

Oil Soap™For dry, sensitive skin, use a clear oil soap. and have normal bubblesWithout the need for water in the formula, the pH can be adjusted to 5.5.

liquid soap from Oil Soap™ when exposed to   water becomes milk

Special Features of Oil Soap™:

- Can make soap oil with a high proportion of oil, resulting in a gentle liquid soap and moisturize the skin well The oil used can choose any type of oil. such as natural oils ( Olive oil , Coconut oil , Jojoba oil ) or austere oil ( LipidSoft Palm , LipidSoft any kind)

- Able to give normal bubbles Not lower than general soap, which usually has a lot of oil in the formula. will make the bubble disappear

- Provides a clear formula not cloudy Just like a normal liquid soap recipe. that when there is oil in the formula will make the formula cloudy

- pH level can be adjusted at level 5.5 for gentle on the skin. The formula is still clear as before. (Please see steps for adjusting pH below)

About MIPA-Laureth Sulfate:

A mild detergent with a positive charge (mild anionic surfactant) made from palm oil. Developed from Laureth Sulfate, which is typically harsh/irritating to the skin. with purpose To be a detergent that is highly gentle. Suitable for dry skin Due to the origin of palm oil and can produce as much foam as common detergents but does not irritate the skin It can also be mixed with oil in a high ratio.

Oil Soap™ is in orange, semi-green color according to the type of detergent pictured. by giving both tenderness Moisturizes (from the natural oils in the formula) and foams at the proper level.

Please see our guide to choosing a surfactant here to compare the different detergents.

Example of formula for mixing oil soap for skin

Coconut oil liquid soap mixed with jojoba and vitamin E, clear texture, suitable for dry skin. easily irritated

Oil Soap™ 45%

Fractionated Coconut Oil 46%

Jojoba Oil 5%

Vitamin E Acetate 1%

Oil Blender 3% (required in formula to prevent stratification)

Steps: Mix it all together. Heat at 70 degrees and blend at low speed not more than 500 rpm until dissolved together Wait for it to cool down to no more than 50 degrees, then add Vitamin E to blend or stir well.

formula can be filled perfume or essential oil into the formula as usual

pH Adjustment Procedure:

The formula before pH adjustment has a pH of around 7.0 which is suitable for the skin. No further pH adjustment is required, but if you want to adjust the pH closer to 5.5, you can. After getting the finished product, prepare Citric Acid (or any fruit acid such as Glycolic Acid, Lactic Acid) mixed with 20% water (selected acid 20%, water 80%) and gradually add to the recipe. Then stir and measure the pH. Continue adjusting until the desired pH is achieved. Warning: Adding too much acid (acid+water) to the recipe. May cause the formula to become cloudy. If a high amount of acid is required Can solve the problem of opaque formula by increasing the proportion of Oil Soap™

*In the formula, in the formula that does not contain water pH cannot be adjusted*

Use: For face wash or bath products that are used for sensitive skin.

Mixing method: Mix together with the oil in the formula.

Usage rate: 15-40% (15-25% for dry skin and 25-40% for normal-oily skin)

Product characteristics: Liquid pH about 7.0

Solubility: can dissolve in oil

Storage: For long term storage Store at room temperature Do not expose to sunlight, heat, seal the lid tightly, shelf life at least 24 months.

INCI Name : MIPA-Laureth Sulfate (and) Laureth-4 (and) Propylene Glycol

Examples of products using Oil Soap™

Eucerin pH5 Shower Oil