Pigments change color from silver to ivory when spread over the skin. Caused by technology encapsulation Give silver outside ivory cladding inside, when broken, it will change from silver to ivory.

Performance characteristics When spread on the skin, it will break down and the silver will fade away. And become ivory on the skin Helps to coat the skin to look ivory.

silver powder, when in the formula, gives a silver color, the formula is silverish

The substance does not act as ivoryning, but helps to coat the skin ivory. When washed off, the result disappears.

Method of use Please study it carefully. So as not to paint the powder Disintegrates into ivory Before spreading it on the skin

1. The formula must have a pH of not more than 6.5, if the formula has a higher pH, the color will break easily. And can be broken in the formula Before spreading on the skin

2. The formula must have a pH of not less than 5.5, if the formula has a pH lower than this, the color will be difficult to break down. Spreading onto the skin If not spreading strong enough Colors will not break down and change color.

3. Add Magic Beads color powder to the last step. (Do not add to the water) Avoid heat that exceeds 80 degrees at low speed. If the heat is high Or spin with a high cycle Will be able to break up and change color In the process of mixing

4. The recipe must not contain more than 80% water.

Usage: For products in the form of gel or cream or lotion or with suitable thickening If too liquid The color powder will precipitate.

Mixing method: Please read the detailed instructions above.

Rate of use: 0.1-3% depending on the desired color intensity

Product characteristics: silver powder

Solubility: Can be spread in cream, serum, lotion

Storage: Avoid heat and sunlight. Be at least 2 years old

INCI Name : Compound