Bubble Max™ X (Quick Burst Bubble)
- Product Code: 127456
Automatically creates bubbles when on the skin (Micro Bubble Generator) which can help with deep-cleansing function.
Can be used in both cleansing (rinsed off) and leave-on (e.g. lip mask, face mask).
Makes bubbles quickly and in large amounts in a short time.
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Appearance | Colorless transparent liquid |
Odor | Characteristic odor |
Relative Density (25°C) | 0.800 - 0.860 |
Bubble Max™ is an automatic bubble generator on the skin (Micro Bubble Generator) that can help with deep-cleansing.
Can be used in both cleansing (rinsed off) and leave-on (e.g. lip mask, face mask).
When on the skin, the foam will gradually form on its own and can be made into a cream, cleanser and mask formula.
Examples of products using Bubble Max™ (All are products for the Korean market, as the manufacturer of Bubble Max™ is based in Korea)
Warning: There are steps to use Bubble Max™. Please follow all the steps.
1. The appropriate usage rate is at 5-8%.
2. Bubble Max™ can evaporate at room temperature, so it should be stored in a cool place. When measuring and mixing into formulas, it should be done in a cool place to prevent Bubble Max™ from evaporating, which can result in incorrect formula ratios.
3. Add to the formula in the last step. Do not expose to heat above 40 degrees (recommended below 30 degrees). Do not mix in a vacuum pot. Must add to a normal blender. Blend at low speed just to mix with the formula.
4. Finished products using Bubble Max™ in the formula should be packed in vacuum-sealed packaging, preventing air from entering or escaping easily, to prevent evaporation of Bubble Max™ from the formula.
5. The formula must contain a detergent to react with Bubble Max™ to automatically produce foam. If there is no detergent , a very high amount of Bubble Max™ (25-35%) is required to produce foam.
Bubble Max™ can be added to any liquid soap, shampoo, face wash, moisturizer, or gel formula, but it should be added at the last step and gently mixed.
Usage: For skin cleansing or skin care products.
Mixing method: Mix into the formula at the last step.
Usage rate: 5-8%
Product characteristics: Colorless liquid, volatile.
Dissolving: Able to be dispersed in the formula (cannot be dissolved, must be emulsified and the formula must be thick enough to avoid separation)
Storage: Can be stored in the refrigerator, tightly closed from sunlight and heat. The product has a shelf life of at least 2 years. **Always close the lid tightly because it can evaporate easily.**
INCI Name : Methyl Perfluorobutyl Ether (and) Methyl Perfluoroisobutyl Ether
Be the first to review this product :-)
Recommend Lab-Service
Lab Service | Price |
---|
Automatically creates bubbles when on the skin (Micro Bubble Generator) which can help with deep-cleansing function.
Can be used in both cleansing (rinsed off) and leave-on (e.g. lip mask, face mask).
Makes bubbles quickly and in large amounts in a short time.
Bubble Max™ is an automatic bubble generator on the skin (Micro Bubble Generator) that can help with deep-cleansing.
Can be used in both cleansing (rinsed off) and leave-on (e.g. lip mask, face mask).
When on the skin, the foam will gradually form on its own and can be made into a cream, cleanser and mask formula.
Examples of products using Bubble Max™ (All are products for the Korean market, as the manufacturer of Bubble Max™ is based in Korea)
Warning: There are steps to use Bubble Max™. Please follow all the steps.
1. The appropriate usage rate is at 5-8%.
2. Bubble Max™ can evaporate at room temperature, so it should be stored in a cool place. When measuring and mixing into formulas, it should be done in a cool place to prevent Bubble Max™ from evaporating, which can result in incorrect formula ratios.
3. Add to the formula in the last step. Do not expose to heat above 40 degrees (recommended below 30 degrees). Do not mix in a vacuum pot. Must add to a normal blender. Blend at low speed just to mix with the formula.
4. Finished products using Bubble Max™ in the formula should be packed in vacuum-sealed packaging, preventing air from entering or escaping easily, to prevent evaporation of Bubble Max™ from the formula.
5. The formula must contain a detergent to react with Bubble Max™ to automatically produce foam. If there is no detergent , a very high amount of Bubble Max™ (25-35%) is required to produce foam.
Bubble Max™ can be added to any liquid soap, shampoo, face wash, moisturizer, or gel formula, but it should be added at the last step and gently mixed.
Usage: For skin cleansing or skin care products.
Mixing method: Mix into the formula at the last step.
Usage rate: 5-8%
Product characteristics: Colorless liquid, volatile.
Dissolving: Able to be dispersed in the formula (cannot be dissolved, must be emulsified and the formula must be thick enough to avoid separation)
Storage: Can be stored in the refrigerator, tightly closed from sunlight and heat. The product has a shelf life of at least 2 years. **Always close the lid tightly because it can evaporate easily.**
INCI Name : Methyl Perfluorobutyl Ether (and) Methyl Perfluoroisobutyl Ether
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products