Mineral Ready™ (Mn+Zn+Cu)
- Product Code: 2291
Mineral solutions include Mn (Magnesium as Magnesium Aspartate), Zn (Zinc as Zinc Gluconate), Cu (Copper as Copper Gluconate).
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
| Test Name | Specification |
|---|---|
| Appearance | Blue clear liquid |
| Identification | Conforms |
| Odour | Conforms to the standard batch |
| pH | 3.5-5.5 |
| Dry Extract | 7.0 - 13.5% |
| Magnesium Content | 0.2-0.5% |
| Zinc Content | 0.4-0.9% |
| Copper Content | 0.05-0.10% |
| Total Aerobic Germs | 100 CFU/g Max |
| Yeasts - Moulds | 100 CFU/g Max |
Mineral Ready™ (Mn+Zn+Cu) is a mineral solution consisting of Mn (Magnesium as Magnesium Aspartate), Zn (Zinc as Zinc Gluconate), Cu (Copper as Copper Gluconate).
Mn, Zn, Cu are essential minerals in the skin oxygenation process (oxygen absorption into the skin).
From the experiment, it was found that using Mineral Ready™ at 1% can
1. Increase "Partial Pressure of Oxygen" At 30 minutes, there is an increase of 14%.
2. Increases "Partial Pressure of Oxygen" At 120 minutes, there is an increase of 11%.
3. At 30 minutes, an increase of cellular respiration (The process of converting various nutrients into cell energy where these energy is in the form of ATP) up 45%
4. At 120 min, there was an increase in Pyruvate (to power the process. Mitochondrial respiration)
5. At 6 hours, a 34% increase in ATP was observed (result of 3,4).
6. At 24h, ATP +38% increased, Cell metabolism (protein formation) +15%, Epidermis reneral (cell renewal) +15%.
After 28 days of continuous use (1% Mineral Ready™) it was found that
1. Skin roughness (roughness, hardness of the skin) decreased by 7%
2. The depth of wrinkles (wrinkle depth) is reduced by 5%.
(Both of these test results Measured with PRIMOS LITE and VISIA-CR
D0 (Day 0) VS D28 (Day 28), CONTROL=Placebo
Use: for any skin care products
Mixing method: dissolved in the water part of the formula
Usage rate: 1-3% (recommended 1-2%)
Product characteristics: light blue or green liquid
Solubility: soluble in water
Storage: For long term storage Store in the refrigerator 4 °C -8 °C Avoid air/light At least 2 years old
INCI Name : Magnesium Aspartate & Zinc Gluconate & Copper Gluconate
Examples of products using Magnesium Aspartate & Zinc Gluconate & Copper Gluconate in the formula
CHANEL HYDRATING OXYGENATING OVERNIGHT MASK
Perricone MD High Potency Eye Lift
Olay Regenerist Luminous Tone Perfecting Treatment
L'occitane Immortelle Precious Night Cream
Dr. Jart Water Fuse Hydro Dew Drop
Murad balancing moisturizer
Be the first to review this product :-)
Recent dicussion threads:
- › 2023-11-28 Please help me look at the recipe.
- › 2023-11-28 Can this formula work?
- › 2023-11-28 Pls.advice
- › 2023-11-24 facial mist
Example recipes using this ingredient:
- › lock_outlineAKIRIS BIO ESSENCE PRECIOUS SERUM
- › lock_outlineAKIRIS BIO ESSENCE PRECIOUS SERUM 2
- › lock_outlineBright And Tight Serum
- › lock_outlinemineral essence1
- › lock_outlinemineral essence2
- › lock_outlineAnti Dark Spot Plus Maxi Nourish Serum
- › lock_outlineSNOWFLAKES MICRO CRYSTAL LUMIÈRE
- › lock_outlinebuaelyn the essence
- › lock_outlineBlue Chamomile Synbiotic Treatment Essence
Recommend Lab-Service
| Lab Service | Price |
|---|
Mineral Ready™ (Mn+Zn+Cu)
Mineral solutions include Mn (Magnesium as Magnesium Aspartate), Zn (Zinc as Zinc Gluconate), Cu (Copper as Copper Gluconate).
Mineral Ready™ (Mn+Zn+Cu) is a mineral solution consisting of Mn (Magnesium as Magnesium Aspartate), Zn (Zinc as Zinc Gluconate), Cu (Copper as Copper Gluconate).
Mn, Zn, Cu are essential minerals in the skin oxygenation process (oxygen absorption into the skin).
From the experiment, it was found that using Mineral Ready™ at 1% can
1. Increase "Partial Pressure of Oxygen" At 30 minutes, there is an increase of 14%.
2. Increases "Partial Pressure of Oxygen" At 120 minutes, there is an increase of 11%.
3. At 30 minutes, an increase of cellular respiration (The process of converting various nutrients into cell energy where these energy is in the form of ATP) up 45%
4. At 120 min, there was an increase in Pyruvate (to power the process. Mitochondrial respiration)
5. At 6 hours, a 34% increase in ATP was observed (result of 3,4).
6. At 24h, ATP +38% increased, Cell metabolism (protein formation) +15%, Epidermis reneral (cell renewal) +15%.
After 28 days of continuous use (1% Mineral Ready™) it was found that
1. Skin roughness (roughness, hardness of the skin) decreased by 7%
2. The depth of wrinkles (wrinkle depth) is reduced by 5%.
(Both of these test results Measured with PRIMOS LITE and VISIA-CR
D0 (Day 0) VS D28 (Day 28), CONTROL=Placebo
Use: for any skin care products
Mixing method: dissolved in the water part of the formula
Usage rate: 1-3% (recommended 1-2%)
Product characteristics: light blue or green liquid
Solubility: soluble in water
Storage: For long term storage Store in the refrigerator 4 °C -8 °C Avoid air/light At least 2 years old
INCI Name : Magnesium Aspartate & Zinc Gluconate & Copper Gluconate
Examples of products using Magnesium Aspartate & Zinc Gluconate & Copper Gluconate in the formula
CHANEL HYDRATING OXYGENATING OVERNIGHT MASK
Perricone MD High Potency Eye Lift
Olay Regenerist Luminous Tone Perfecting Treatment
L'occitane Immortelle Precious Night Cream
Dr. Jart Water Fuse Hydro Dew Drop
Murad balancing moisturizer
| Mechanism | - |
| Appearance | - |
| Longevity | - |
| Strength | - |
| Storage | - |
| Shelf Life | - |
| Allergen(s) | - |
| Dosage (Range) | - |
| Recommended Dosage | - |
| Dosage (Per Day) | - |
| Recommended Dosage (Per Day) | - |
| Mix Method | - |
| Heat Resistance | - |
| Stable in pH range | - |
| Solubility | - |
| Product Types | - |
| INCI | - |
Cart
No products
Subtotal:
$0.00
$0.00
Total :