Silk Lotion Maker
- Product Code: 6505
Emulsifier oil in water system that was developed. Due to the base structure of silicone (Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone) it has a special, soft and smooth texture on its own, making it suitable for any skin care regimen. that want to have a soft and smooth touch surface Minimizes the greasiness from the formula components.
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Refractive Index 25C | 1.4230-1.4330 |
Density 25C | 0.980-1.010 |
Colour to Gardner | 1 Max |
Odour | Conform |
Viscosity 25C | 1800-3200 mPa.s. |
Acid Value | 0.20 mgKOH/g Max |
Silk Lotion Maker is an oil in water emulsifier developed. Due to the base structure of silicone (Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone) it has a special, soft and smooth texture on its own, making it suitable for any skin care regimen. that want to have a soft and smooth touch surface Minimizes the greasiness from the formula components.
Pros of Silk Lotion Maker:
1. Gives the skin a good texture texture over other types of emulsifier and does not clog the skin.
2. It can be soldered by cold-process (spinning together without heating).
3. It can be used to solder the spray formula. or formulas requiring low viscosity
4. Being a non-ionic emulsifier, it is gentle on the skin and easily blends with any other emulsifier or other gel maker in the formula.
Instructions for use
1. In general cream and lotion formulas, mix Silk Lotion Maker in oil, suggesting a rate of 1.5-3% when mixed well. So gradually added to the part of the water that is continuously spinning. Any gel maker such as Carbomer or Xanthan Gum can be added to the formula as a final step. no heat needed
2. In a spray formula or a formula that requires a low thickness, use 2-3% Silk Lotion Maker with Polysorbate 80 1%, mixed according to step 1.
3. In formulas that require heat to mix This is because there are components in the formula that require heat to dissolve. You can use the heat normally. and follow the steps in step 1 as well
Use: It is a creamy binder (emulsifier) without sticky. and gives a light texture to a level that can be sprayed
Mixing method: Please see instructions above.
Usage rate: 1-3% depending on the proportion of oil in the formula by cementing the oil up to a maximum of 30%
Product characteristics: clear opaque liquid
Solubility: can dissolve in oil
Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 2 years
INCI Name : Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone
Examples of products used Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone in the formula
LANCOME Advanced Genifique Eye Cream
LANCOME Visionnaire Corrector
SkinCeuticals Hyaluronic Acid Intensifier Serum
Murad Pore Rescue Balancing Moisturizer
Nu Skin Ageloc Me Serum L7
Be the first to review this product :-)
Recent dicussion threads:
- › 2023-02-01 Ask about ingredients. What should I increase or decrease?
- › 2021-08-24 Ask for information about cosmetic raw materials.
Example recipes using this ingredient:
- › lock_outlineAcne Peptide Serum
- › lock_outlineHair Treatment
- › lock_outlineAnti-Aging Cream
- › lock_outlineALOE VERA PLUS CREAM
- › lock_outlineRe:Solution Serum
- › lock_outlineSENSITIVE SKIN CARE CREAM
- › lock_outlineAge Resist Day Care
- › lock_outlineAge Resist Night Care
- › lock_outlineShea and Moisture Soft Serum
- › lock_outlineAge Resist Intense Care
- › lock_outlineAge Resist Skin Renew Care
- › lock_outlineAge Resist Night Care 2021.04
- › lock_outlineDaily and nightly serum
- › lock_outlineAge Resist Night Care 2021.05
- › lock_outlineAge Resist Day Care 2021.06
- › lock_outlineBlemish Clarifying Treatment
- › lock_outlineAge Resist AC Care
- › lock_outlineSkin Rejuvenate Cream No.5
- › lock_outlineAge Resist Night Care 2022.11
- › lock_outlineAge Resist Night Care 2022.12
- › lock_outlineAge Resist Acne Care 2023.01
Recommend Lab-Service
Lab Service | Price |
---|
Emulsifier oil in water system that was developed. Due to the base structure of silicone (Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone) it has a special, soft and smooth texture on its own, making it suitable for any skin care regimen. that want to have a soft and smooth touch surface Minimizes the greasiness from the formula components.
Silk Lotion Maker is an oil in water emulsifier developed. Due to the base structure of silicone (Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone) it has a special, soft and smooth texture on its own, making it suitable for any skin care regimen. that want to have a soft and smooth touch surface Minimizes the greasiness from the formula components.
Pros of Silk Lotion Maker:
1. Gives the skin a good texture texture over other types of emulsifier and does not clog the skin.
2. It can be soldered by cold-process (spinning together without heating).
3. It can be used to solder the spray formula. or formulas requiring low viscosity
4. Being a non-ionic emulsifier, it is gentle on the skin and easily blends with any other emulsifier or other gel maker in the formula.
Instructions for use
1. In general cream and lotion formulas, mix Silk Lotion Maker in oil, suggesting a rate of 1.5-3% when mixed well. So gradually added to the part of the water that is continuously spinning. Any gel maker such as Carbomer or Xanthan Gum can be added to the formula as a final step. no heat needed
2. In a spray formula or a formula that requires a low thickness, use 2-3% Silk Lotion Maker with Polysorbate 80 1%, mixed according to step 1.
3. In formulas that require heat to mix This is because there are components in the formula that require heat to dissolve. You can use the heat normally. and follow the steps in step 1 as well
Use: It is a creamy binder (emulsifier) without sticky. and gives a light texture to a level that can be sprayed
Mixing method: Please see instructions above.
Usage rate: 1-3% depending on the proportion of oil in the formula by cementing the oil up to a maximum of 30%
Product characteristics: clear opaque liquid
Solubility: can dissolve in oil
Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 2 years
INCI Name : Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone
Examples of products used Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone in the formula
LANCOME Advanced Genifique Eye Cream
LANCOME Visionnaire Corrector
SkinCeuticals Hyaluronic Acid Intensifier Serum
Murad Pore Rescue Balancing Moisturizer
Nu Skin Ageloc Me Serum L7
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products