Tetrahydropiperine (Natural Penetration Enhancer)
Cosmetics
Code: 2280
Black Pepper Extract tetrahydropiperine which has been found to have the ability to help bring various ingredients to the skin well
Tetrahydropiperine (Natural Penetration Enhancer) is an extract from black pepper which has been found to have the ability to help transport various ingredients to the skin well.
Usage: Dissolve in any of the following solvents and then mix with the formula. By adding in the last step. Blend to distribute evenly with the formula. Do not expose to heat over 40 degrees.
- Propylene Glycol (at a rate of 1:100, for example, if you want to dissolve 1 gram of Cosmoperine®, you must use 100 grams of Propylene Glycol)
- Fractionated Coconut Oil (at a rate of 1:100)
- Glycerin (at a rate of 1:200)
Usage: mixed in any product
Mixing method: Please follow the dissolving method in the product detail. Do not expose to heat above 80C.
Usage rate: 0.01%
Product appearance: white powder
Solubility: Can dissolve in water
Storage: Can be stored in a cool place at 2-6 degrees, but close the bottle cap tightly. Then completely protected from sunlight or heat. The product has a minimum shelf life of 2 years.
INCI Name : Tetrahydropiperine
- Room (25-40C)
- 24 Months from manufacturing or testing date.
- 0.01% - 0.01%
- 0.01%
- Please follow instruction under product info carefully.
- Avoid heat above 40C
- 5.00 - 6.50
- Soluble in Water, Soluble in glycols, Dispersible in oil
- Active Ingredient, Active Ingredient Powder, Skin Care Base Ingredient
- -
| Test Name | Specification |
|---|---|
| Description | Off white, low melting solid with characteristics odor |
| Identification | To comply by HPLC |
| Solubility | Soluble in chloroform, methanol and insoluble in water |
| Loss on Drying | Not more than 1.0% w/w (dried at room temp, under vacuum) |
| Content of Tetrahydropiperine (HPLC) | 98% Min |
| Ash Content | 1% Max |
| Bulk Density (g/100ml) | 75-85 |
| Total heavy metals | Not more than 20ppm (ug/g) |
| Lead | Not more than 3ppm (ug/g) |
| Arsenic | Not more than 1ppm (ug/g) |
| Cadmium | Not more than 1ppm (ug/g) |
| Mercury | Not more than 0.1ppm (ug/g) |
| Residual Solvents | To comply as per USP |
| Residual Pesticides | To comply as per USP |
| Total aerobic microbial count | Not more than 1000CFU/g |
| Total yeasts and molds count | Not more than 100CFU/g |
| E. Coli | Negative / 10g |
| Salmonella | Negative / 10g |
| Staphylococcus aureus | Negative / 10g |
| Pseudomonas aeruginosa | Negative / 10g |
search
hourglass_emptyLoading product examples...