Carbomer Dead-Skin (High Viscosity, Transparent)
Cosmetics
Code: 35593
It is a carbomer that gives high thickness. It is designed to be used to create scurf gel. When rubbed on the skin, it will form clumps.
Carbomer Dead-Skin (High Viscosity, Transparent)
It is a carbomer that gives high thickness. It is designed to be used to create scurf gel. When rubbed on the skin, it will form clumps.
Can be used in general formulas. Using at a low rate gives a clear gel.
In the case of using to create scurf gel Use high concentration.
Example of a scurf gel formula (when rubbing on skin, balling effect will occur similar to dead-skin removal)
Carbomer Dead-Skin 1-2%
Cetrimonium Chloride (CTAC) 5-6%
Mild Preserved Eco 1% (preservative)
The rest must be 100% water.
Usage: for all kinds of products who want to increase viscosity Increase gel texture (thickening)
Mixing method: mixed in water (water-phase) can withstand pH values in the range of 6-7.
Usage rate: 0.5-2% (depending on desired viscosity, in case of use in scurf gel formula Must use high dosage (1-2%)
Product appearance: white powder
Solubility: Can dissolve in water
Storage: For long-term storage Store at room temperature. Do not expose to sunlight. and avoid humidity
INCI Name : Carbomer
- Room (25-40C)
- 24 Months from manufacturing or testing date.
- 0.10% - 2.00%
- 0.00%
- Add into water phase. Heat tolerant.
- Avoid heat above 80C
- 6.00 - 7.00
- Soluble in Water
- Clear Gel, Mask, Cleanser
- › CARBOMER
- -
| Test Name | Specification |
|---|---|
| Appearance | Fluffy white powder |
| 0.5% aq. solution viscosity (mPa.s.) | 45000-80000 |
| 0.5% aq. solution light transmittance | 85% Min |
| Residual ethyl acetate | 0.5% Max |
| Residual cyclohexane | 0.3% Max |
| Ignition residue | 4% Max |
| Acrylic acid | 0.25% Max |
| Hg | 1ppm Max |
| As | 2ppm Max |
| Cd | 5ppm Max |
| Pb | 10ppm Max |
| -COOH % | 56-68% |
| Loss on drying | 2% Max |
search
hourglass_emptyLoading product examples...