Tone-Up Beads (1mm, Wet)
- Product Code: 33655
Contains Titanium Dioxide to act as a skin tone-up when spread onto the skin and breaks apart.
Size 1mm
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Test Name | Specification |
---|---|
Appearance | White colored spherical shaped beads |
Odor | Odorless |
Total Aerobic Microbial Count | < 100 cfu/g or ml |
Total Yeast and Mold Count | < 100 cfu/g or ml |
Beads containing Titanium Dioxide to act as a skin tone-up when spread onto the skin and break apart.
This type of beads is ready to use. Can be added to the formula in the final step. Stir gently to distribute in the desired amount of formula. But it softens and breaks easily on the surface. When in the condition below:
In the formula, the formula should have an emulsifier or thickener that is an emulsifier in itself, for example Satin Cream Maker. When this kind of beads are soaked in an emulsion or clear gel that has a thickener/emulsifier or surfactant in the formula, the beads will Softens itself after 48 hours and when applied to the skin. Will break apart easily
In case of using in clear gel, use Satin Cream Maker 1-2% or Aristoflex AVC 0.5-1.5% to create gel texture.
Or can use HEC 0.5-2% or HPMC 0.5-2.0% + Polysorbate 20 1-3%.
If there is no emulsifier in the formula, the beads will be hard and difficult to break.
*Products packed in jars which will be added distilled water This is to soak the beads so they don't dry out. By weight that is measured by the weighing and measuring company for distribution. Only the weight of the beads will be counted. Does not include distilled water for soaking the beads*
Usage: Can be used in all types of products. But suitable for products that are clear. To be able to see the beads clearly and beautifully.
Mixing method: Mix in the last part. Do not expose to heat. and strong spinning This is because the beads may break apart.
Usage rate: 0.5-2% depending on the amount required.
Product characteristics: Granules immersed in water.
Solubility: Can be dispersed in any formula.
Storage: Store in the refrigerator at a temperature of 5-10 degrees. Do not expose to sunlight or heat. Seal the lid tightly. Shelf life is at least 2 years.
INCI Name : Water, Mineral Oil, Cyclopentasiloxane, Propylene Glycol, Algin, Dimethicone, Titanium Dioxide, Phenoxyethanol, Chlorphenesin, Disodium EDTA
Be the first to review this product :-)
Recommend Lab-Service
Lab Service | Price |
---|
Contains Titanium Dioxide to act as a skin tone-up when spread onto the skin and breaks apart.
Size 1mm
Beads containing Titanium Dioxide to act as a skin tone-up when spread onto the skin and break apart.
This type of beads is ready to use. Can be added to the formula in the final step. Stir gently to distribute in the desired amount of formula. But it softens and breaks easily on the surface. When in the condition below:
In the formula, the formula should have an emulsifier or thickener that is an emulsifier in itself, for example Satin Cream Maker. When this kind of beads are soaked in an emulsion or clear gel that has a thickener/emulsifier or surfactant in the formula, the beads will Softens itself after 48 hours and when applied to the skin. Will break apart easily
In case of using in clear gel, use Satin Cream Maker 1-2% or Aristoflex AVC 0.5-1.5% to create gel texture.
Or can use HEC 0.5-2% or HPMC 0.5-2.0% + Polysorbate 20 1-3%.
If there is no emulsifier in the formula, the beads will be hard and difficult to break.
*Products packed in jars which will be added distilled water This is to soak the beads so they don't dry out. By weight that is measured by the weighing and measuring company for distribution. Only the weight of the beads will be counted. Does not include distilled water for soaking the beads*
Usage: Can be used in all types of products. But suitable for products that are clear. To be able to see the beads clearly and beautifully.
Mixing method: Mix in the last part. Do not expose to heat. and strong spinning This is because the beads may break apart.
Usage rate: 0.5-2% depending on the amount required.
Product characteristics: Granules immersed in water.
Solubility: Can be dispersed in any formula.
Storage: Store in the refrigerator at a temperature of 5-10 degrees. Do not expose to sunlight or heat. Seal the lid tightly. Shelf life is at least 2 years.
INCI Name : Water, Mineral Oil, Cyclopentasiloxane, Propylene Glycol, Algin, Dimethicone, Titanium Dioxide, Phenoxyethanol, Chlorphenesin, Disodium EDTA
Mechanism | - |
Appearance | - |
Longevity | - |
Strength | - |
Storage | - |
Shelf Life | - |
Allergen(s) | - |
Dosage (Range) | - |
Recommended Dosage | - |
Dosage (Per Day) | - |
Recommended Dosage (Per Day) | - |
Mix Method | - |
Heat Resistance | - |
Stable in pH range | - |
Solubility | - |
Product Types | - |
INCI | - |
Cart
No products