PEG/PPG-18/18 Dimethicone

PEG/PPG-18/18 Dimethicone

COSMETICS INGREDIENT

PEG/PPG-18/18 Dimethicone (12.5% in Cyclopentasiloxane) is used as a water-in-silicone emulsifier.

Price 84.00 ฿ This special price only valid for web order

gram (mininum 20 gram)

Unit price will be cheaper for larger size
The price will be calculated based on the size you enter
>10,000g Discount 5% , >25,000g Discount 10%

Min100GCustom1KG



piece(s), Packing Cost : 10฿/pcs
The product will be packed based on the requested quantity



Add to cart Favorite PDF

  • Info
  • Documents
  • Technical

PEG/PPG-18/18 Dimethicone (12.5% in Cyclopentasiloxane) is used as a water-in-oil/silicone emulsifier.

 

recommend more Magnesium Sulfate 1-2% to improve formula stability reduce the chance of stratification

*Adding a High-HLB emulsifier such as Polysorbate 80 in a small amount of water (0.25-0.5%) before the water-oil bonding. will help the water-oil synchronization made easier Formulas will coordinate faster. and reduce the spinning power to save energy used in production

 

Use: It is a water-to-silicone binder.

Mixing method: Mix in the silicone, and while blending the siliconone, gradually add the water. Continue to blend until well blended.

Usage rate: 7-15% (10% recommended for most recipes)

Product characteristics: thick liquid

Solubility: Can be dissolved in silicone, dispersed in water.

Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 2 years

 

INCI Name : Cyclopentasiloxane, PEG/PPG-18/18 Dimethicone

Appearance:

Storage: Store under room temperature. Avoid Heat & Light.

Shelf Life: 24Months from manufacturing or testing date (Current Lot will expire: )

Dosage (Range): 7% - 15%

Recommended Dosage: 10%

Mix Method: Mix in silicone phase. Heat tolerant.

Heat Resistance: Avoid heat above 80C

Stable in pH range: 3.5 - 9

Solubility: Soluble/Miscible in silicone , Dispersible in water

Product Specification:


Test Specification
Appearance Translucent to hazy, slightly gray liquid. Slight sediment possible.
Viscosity, Capillary 25Degree C (cSt) 400-1000
D4 (Chromatogram 1000) 0.099% Max
Non Volatile Content 10.0-11.0%
Refractive Index 1.3972-1.3988
Specific Gravity 0.960-0.966

Cart

No products

Shipping 0.00 ฿
Total 0.00 ฿

Warning

All ingredients are for manufacturing purpose. Do not use them directly. Finished product must be registered with FDA before selling to endusers

PrestaShop Modules

Our Facebook