Nano-TXA™ (Tranexamic Acid Nano Emulsion, Penetration Base)
Cosmetics
Code: 33491
Tranexamic Acid is in the form of Nano Emulsion, which can be released into the skin at a level approximately 2 times that of general Tranexamic Acid, with a maximum release time into the skin of 8 hours. By using it as a Penetration Base, other active ingredients can be added to the base. This Nano Emulsion can help bring other water-soluble active ingredients into the skin in quantities approximately 2 times higher.
Nano-TXA™ (Tranexamic Acid Nano Emulsion, Penetration Base)
Tranexamic Acid is in the form of Nano Emulsion, which can be released into the skin at a level approximately 2 times that of general Tranexamic Acid, with a maximum release time into the skin of 8 hours.
By using it as a Penetration Base, other active ingredients can be added. This Nano Emulsion base can help bring other water-soluble active ingredients into the skin in quantities approximately 2 times higher.
Results of experiments with Franz-cell to test skin penetration.
Test results measuring particle size
Usage: Can be added to other water-soluble active ingredients. It can help bring other types of water-soluble active substances into the skin better. You can add up to 10%.
Cannot add any oil or oil-soluble ingredients. Because it will affect the particle size of the nanoemulsion.
Usage: For Whitening products
Mixing method: Mix in water (water-phase) and can withstand heat. But heat should not be used for a long time and the optimum pH is in the range of 3-8 (best at 4.0-7.0).
Usage rate: 90-100%
Product appearance: semi-translucent liquid
Solubility: Can dissolve in water
Storage: For long-term storage Store at room temperature. Do not expose to sunlight or heat. Seal the lid tightly.
- Opaque liquid
- Room (25-40C)
- 24 Months from manufacturing or testing date. (Current Lot will expire: 08/2026)
- 90.00% - 100.00%
- 0.00%
- Add into water phase. Heat tolerant.
- Avoid heat above 80C
- 4.00 - 7.00
- Soluble in Water
- Cream, Toner, Serum
- -
| Test Name | Specification |
|---|---|
| Appearance | Slight cloudy free flowing liquid |
| Tranexamic Acid Content (% w/w) | 2.9-3.3 |
| Heavy metals as Pb | 10ppm Max |
| Arsenic | 1ppm Max |
search
hourglass_emptyLoading product examples...