Carbomer Ultrez 30 (Electrolyte Tolerance)
Cosmetics
Code: 31007
Gel Maker provides a clear, easy-to-use gel texture that does not require heat in the process.
Can be used in formulas in the range of pH 4-12, high clarity, quick swell, electrolyte resistant.
Carbomer Ultrez 30 is a gel maker that produces a clear, easy-to-use gel texture that does not require heat in the process. Can be used in formulas in the range of pH 4-12, providing high clarity, being resistant to electrolyte.
Can be used as a defoamer (to reduce bubbles in the formulation) by using at a rate of 0.1%, blended to dissolve into the formulation. It will help reduce the bubbles in the formula well.
In case you want to get clear texture Formulated with a high proportion of ethyl alcoho, recommended. AMP (2-Amino-2-methyl-1-propanol) To neutralize other types of alkalis.
Use: It is a water gel texture. Make the gel texture clear.
How to mix: Blend or stir until dissolved in water.
Utilization rate: 0.1-2%
Product characteristics: white powder
Solubility: can dissolve in water
Storage: can be stored at room temperature But close the bottle cap tightly. Then completely covered from sunlight or heat, the product is at least 2 years old.
INCI Name : Carbomer
- Room (25-40C)
- 24 Months from manufacturing or testing date.
- 0.50% - 4.00%
- 4.00%
- Add into oil phase. Heat tolerant.
- Avoid heat above 80C
- 4.00 - 9.00
- Soluble in Water
- › CARBOMER
- -
| Test Name | Specification |
|---|---|
| BROOKFIELD VIS, 0.5% MUCILAGE @ 25 C | 45000-65000 cP |
| ETHYL ACETATE | 0.45% Max |
| CYCLOHEXANE | 0.45% Max |
| LOSS ON DRYING | 2.0% Max |
| HM AS (PB,AS,HG,SB) | 10ppm Max |
| ARSENIC | 2ppm Max |
| CLARITY, % TRANSMITTANCE | 88% Min |
| WETTING TIME (MINUTES) | 15 Max |
search
hourglass_emptyLoading product examples...