Carbomer U20 (EasyDisperse, Electrolyte Tolerance, e.q. Carbopol Ultrez 20)
Cosmetics
Code: 33579
Can inflate in water easily and quickly. It doesn't have to be soaked in water for a long time. Can be spun to create a gel texture immediately, with good electrolyte resistance.
Carbomer U20 (EasyDisperse, Electrolyte Tolerance, eq Carbopol Ultrez 20)
Can inflate in water easily and quickly. It doesn't have to be soaked in water for a long time. It can be blended to create a gel texture immediately.
Good electrolyte resistance
This product It is not produced by the manufacturer Carbopol Ultrez 20 but is chemically similar.
Usage: for all kinds of products who want to increase viscosity Increase gel texture (thickening)
Mixing method: Mix in water (water-phase) by adjusting the pH to be in the range of 6-7 with an alkali such as Triethanolamine. Shouldn't be over blended. 2500 rpm This will damage the polymer and weaken the formula.
Usage rate: 0.5-3% (depending on desired viscosity)
Product appearance: white powder
Solubility: Can dissolve in water
Storage: For long-term storage Store at room temperature. Do not expose to sunlight. and avoid humidity
INCI Name : Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- Room (25-40C)
- 24 Months from manufacturing or testing date.
- 0.50% - 3.00%
- 0.00%
- Add into water phase. Heat tolerant.
- Avoid heat above 80C
- 4.00 - 10.00
- Soluble in Water
- Cream, Lotion, Clear Gel, Toner, Shampoo
- -
| Test Name | Specification |
|---|---|
| 0.5% Aqueous solution viscosity (mPa.s.) | 30000-60000 |
| Salt Tolerance | 4000 Min |
| Aceate / Cyclohexane % | 0.5% Max |
| Acrylic acid | 0.25% Max |
| Residual ethyl | 0.3% Max |
| Wetting time | 15 minutes Max |
| Loss on drying | 2% Max |
search
hourglass_emptyLoading product examples...