Carbomer 1342 (Electrolyte Tolerance, Long-flow)
Cosmetics
Code: 33577
It has special characteristics: it is resistant to electrolyte well and has a long-flow texture (slightly stretched).
Carbomer 1342 is a gel-forming substance. without using heat But an alkali (such as Triethanolamine or Sodium Hydroxide or AMP (2-Amino-2-methyl-1-propanol) ) must be used to form the gel.
Carbomer 1342 has special characteristics: good electrolyte resistance and a long-flow (slightly stretched) texture.
Usage: for all kinds of products who want to increase viscosity Increase gel texture (thickening)
Mixing method: Mix in water (water-phase) by adjusting the pH to be in the range of 6-7 with an alkali such as Triethanolamine. Shouldn't be over blended. 2500 rpm This will damage the polymer and weaken the formula.
Usage rate: 0.5-3% (depending on desired viscosity)
Product appearance: white powder
Solubility: Can dissolve in water
Storage: For long-term storage Store at room temperature. Do not expose to sunlight. and avoid humidity
INCI Name : Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- Room (25-40C)
- 24 Months from manufacturing or testing date.
- 0.50% - 3.00%
- 0.00%
- Add into water phase. Heat tolerant.
- Avoid heat above 80C
- 6.00 - 7.00
- Soluble in Water
- Cream, Lotion, Clear Gel, Toner, Cleanser
- -
| Test Name | Specification |
|---|---|
| Salt tolerance | 1000 Min |
| 0.5% Aqueous solution viscosity (mPa.s.) | 9500-26500 |
| Residual ethyl acetate | 0.5% Max |
| Residual cyclohexane | 0.3% Max |
| Ignition residue | 4.0% Max |
| Acrylic acid | 0.25% Max |
| -COOH % | 50-68% |
search
hourglass_emptyLoading product examples...