Silver Solution, concentration 2000ppm, is in liquid form dissolved in water. without settling

Ionic type, concentration 2000ppm, pH 10-12, suitable for formulas that are alkaline.

Silver Solution, Ionic type, concentration 2000ppm, is in liquid form, dissolved in water. without precipitation It is a colorless liquid. or very light

Nano Silver Disinfects by binding (binding) of positively charged silver ions to negatively charged proteins. which results in the death of germ cells as well as being unable to divide cells to grow (Please see the description in the picture below)  

Instructions for using Nano Silver Solution (2000ppm) in place of any preservative in the formula.

Nano Silver Solution (2000ppm) is effective in controlling germs in cosmetic formulations. It is used at least at a concentration of 2% (or 40ppm in the formulation) and is soluble in all formulations.

The company sells 4 types of Nano Silver.

1. 20nm Silver Pure™ In the form of thick cream (INCI: Silver) contains 2400ppm Nano Silver, particle size 20nm (nm).

2. Silver "ionic" Solution It is a clear, colorless liquid containing Silver (as silver salt) at a concentration of 2000ppm (INCI: Silver Citrate, Citric Acid ) can be dissolved in water Suitable for acidic formulations (pH 3-7).

3. Nano Silver "colloidal" Solution It is a clear yellow liquid with 2000ppm Nano Silver (INCI: Colloidal Silver) can be suspended in water. Particle size 1-25nm (nm). Suitable for neutral or alkaline formulations (pH 7-12).

4. Nano Silver Powder in powder form (INCI: Silver) Contains Nano Silver, 99.9% concentration Particle size 20nm (nm)

Instructions for using each type of Nano Silver

- Silver "ionic" solution or silver in liquid form, effective disinfection at a level equivalent to Nano Silver "colloidal" solution The two types of Silver have the highest disinfection efficiency. (at the same concentration rate) compared to other types of silver, the use rate of 0.3% is sufficient to kill all types of disinfectants in a short time.

- Silver "ionic" solution It is a clear, colorless liquid, but Nano Silver "colloidal" solution It is a clear, dark yellow liquid.

- Silver "ionic" solution have lower stability Nano Silver "colloidal" solution By product used Silver "ionic" solution Must protect from light Do not pack in transparent packaging. and avoid high heat

- both Silver "ionic" solution and Nano Silver "colloidal" solution unable to withstand heat (In the event that the production process requires heat, separate the two types of Silver to be added in the final step when the product cools down)

- both Silver "ionic" solution and Nano Silver "colloidal" solution can be used in conjunction with detergent (surfactant) non-ionic (nonionic) and anionic (negative) types, but can be used in combination with cationic (positively charged) surfactants.

- Nano Silver Powder and 20nm Silver Pure It has the highest stability with shelf-life of not less than 8 years and can be in all formulations. This makes it convenient to use in all kinds of products. This is especially true for products that cannot use other forms of Silver as they may cause instability.

- 20nm Silver Pure is Nano Silver Powder Selected at 20nm and completely dispersed in a Polyethylene Glycol base for effective action. because if using powder Nano Silver Powder In general formulas, special tools are required. in dispersion, so that the Nano Silver powder is completely dispersed. Otherwise, it will not be able to have the effective disinfection effect. 20nm Silver Pure is easier to use. Nano Silver Powder

- Products in the form of wash-off (use and wash off, such as toothpaste, shampoo) use 20nm Silver Pure is Nano Silver Powder Because it can spread and settle on the skin or other areas of the body as well

- Products in the form of leave-on (when used, do not wash off such as skin cream) use Silver "ionic" solution and Nano Silver "colloidal" solution Because it is cheaper and colorless or light-colored, does not interfere with the color of the product.

Use: for any product by acting as a disinfectant

Mixing method: Please consult the above information. The pH of the formula should be in the range of 8-12 (if the formula has a pH lower than 8, please use Ionic Silver, pH type 4-6 instead

Usage rate: 1-5% (recommended 2% or equal to 40ppm for most control/sterilization)

Product characteristics: Colorless or very light gray liquid

Solubility: can dissolve in water

Storage: Should always be refrigerated before being used in a formula.

INCI Name : Silver Citrate

Silver Content: 2000ppm

Examples of products that use Silver Citrate

Cleansing/acne treatment product range:

Murad Clarifying Cleanser
Murad Outsmart Acne Clarifying Treatment
Mario Badescu Vitamin C Serum
MURAD ADVANCED BLEMISH & WRINKLE REDUCER 30ML
Mario Badescu Facial spray with, aloe,Chamomolie and Lavender
Murad Time Release Acne Cleanser

deodorant product group

Nivea Silver Protect Deodorant
Nivea Silver Protect Shower Gel
Nivea Men 48 hour Silver Protect Anti-perspirant

Other product groups

Eucerin Silver Shave Shaving Gel