Zinc Oxide Nano (35nm) UVA/UVB protection, lightweight, oil free. does not clog pores High security It can be easily and completely dispersed by 35nm powder. It is a level that can block UVA light well and does not whiten the skin.

Self-Emulsifier Through an emulsified process, water can be added and blended to blend together. (please check steps below) without adding emulsifier

Zinc Oxide Nano (35nm) UVA/UVB protection, lightweight, oil free. does not clog pores High security It can be easily and completely dispersed by 35nm powder. It is a level that can block UVA light well and does not whiten the skin.

35nm type Liquid is a liquid type of Zinc Oxide Nano that has undergone a special process to Powder Zinc Oxide Size 35 Nano Meter can be completely dispersed in any case. Therefore, it is easy to create sunscreen products.

Self-Emulsifier Through an emulsified process, water can be added and blended to blend together. (please check steps below) without adding emulsifier

Zinc Oxide 35nm Liquid is the most easily mixed 35nm Zinc Oxide type. can be added to any formula and stir well Get a highly effective, lightweight sunscreen formula Developed for use in water-in-oil emulsion systems (not recommended for use in oil-in-water emulsion systems). It is waterproof and provides a higher SPF than oil-in-water formulas. and can also be compatible with make-up, BB, CC formulas

Zinc Oxide 35nm Liquid contains 45-48% active Zinc Oxide (35nm).

should be used together with Titanium Dioxide 15nm Liquid To be able to protect the sun in a wider range. (broad-spectrum) covering both UVA/UVB wavelengths completely

Examples of sunscreen recipes Zinc Oxide 35nm Liquid / Titanium Dioxide 15nm Liquid (water-in-oil cream)

1.Water 44%

2. Cyclomethicone 15%

3. Titanium Dioxide 15nm Liquid 25%

4.Zinc Oxide 35nm Liquid 15%

5. Mild Preserved Eco 1%

Procedure: Mix 2+3+4 together at 70°C to melt together. Then, while blending continuously, gradually add 1 to the formula, then add 5.

In case you want to adjust the formula to be more viscous, use any type of wax, for example: Soft Wax or Polyethylene Wax , or use Hectorite Gel (Cyclomethicone Base) or use Hectorite Gel (Isododecane Base) depending on the desired texture

Pros of Physical Sunscreen: Less chance of clogging pores Chemical Sun Screen and have higher security Chemical Sun Screen Because there are no ingredients that can be absorbed into the skin. Physical Sun Screen Just acts as a cover to prevent UVA/UVB from hitting the skin directly.

Cons of Physical Sunscreen: Because it is a powder that acts as a concealer, preventing UVA/UVB light from easily hitting the skin. Therefore tend to make the skin more shiny or white when used with a small particle size (nano particle) helps to reduce this white / shiny, but still fight Chemical Sun Screen No, that doesn't cause white/shiny.

Differences between Titanium Dioxide and Zinc Oxide: both ingredients Protects against UV light in different wavelengths. Titanium Dioxide can protect against short-wave UVA and UVB, both short and long wavelengths, while Zinc Oxide can protect against long-wave UVA well. in mixing sunscreen formulas Therefore, both ingredients should be used. Because it can cover all UVA/UVB wavelengths completely.

The company sells Zinc Oxide 4 types.

1. Zinc Oxide 200nm EasyDisperse™ 200nm powder, silicone coated Makes it easy to spread in any sunscreen formula. Gives a soft feeling on the skin, adheres well to the skin, provides low whiteness.

2. Zinc Oxide Micronized Powder type, uncoated, suitable for use in formulations to act on disinfection, such as deodorant formulations, not suitable for use in sunscreens. that requires high dispersion to achieve good sun protection performance

3. Zinc Oxide 35nm Liquid Liquid The particle size of the powder is 35nm, ready to mix in any sunscreen formula, easy to use, feels soft on the skin, adheres well to the skin, does not cause whiteness on the skin.

4. Zinc Oxide Nano EasyDisperse™ Small powder type, less than 200nm, coated with silicone. Makes it easy to spread in any sunscreen formula. Gives a soft feeling on the skin, adheres well to the skin, gives the lowest whiteness.

Recommendations for selection in various products

sunscreen products who want to focus on the efficiency of sunscreen And does not have to cause whiteness on the skin as an emulsion in the oil-in-water system. Use Zinc Oxide Nano EasyDisperse™

sunscreen products who want to focus on the efficiency of sunscreen and does not have to cause whiteness on the skin as an emulsion in the water-in-oil system used Zinc Oxide 35nm Liquid Liquid

sunscreen products that want to claim that non-nano Zinc Oxide is to be used Zinc Oxide 200nm EasyDisperse™

Diaper rash products, deodorant or deodorant/odor, or disinfectant to choose from. Zinc Oxide Micronized

The company provides free SPF measurement service in case of use. PMMA Booster in the formula to help Boost the SPF/PA value

Utilization rate: 5-40% (use according to the desired performance It is recommended to use in conjunction with Titanium Dioxide 15nm Liquid , according to FDA law, not allowed to use more than 50% or equal to Active Zinc Oxide 25% )

nature: liquid white

Mixing: for all types of products which can be mixed with the oil part Or the silicone part in the formula and stir well immediately.

Storage: Store at room temperature. Avoid sunlight, valid for 2 years.

INCI: Zinc Oxide (and) Cyclomethicone (and) PEG-10 Dimethicone (and) Hydrogen Dimethicone